Use and Care Guide

12
Using Proper Cookware
The size and type of cookware used will influence the heat
setting needed for best cooking results. Be sure to follow
the recommendations for using proper cookware as illus-
trated in Figure 1 and Figure 2.
Cookware Material Types
The cookware material determines how evenly and quickly
heat is transferred from the surface element to the pan
bottom. The most popular materials available are:
Aluminum - Excelle
nt hea
t conductor. Some types of
food will cause it to darken (Anodized aluminum
cookware resists staining and pitting).
Copper - Exce
llen
t heat conductor but discolors easily
(see Aluminum).
•Stainless -
Slow heat conductor with uneven cooking
results. Durable, easy to clean, and resists staining.
•Cast Iron - A slow
heat conductor, but will retain heat
very well. Cooks evenly once cooking temperature is
reached.
Porcelain-enamel on metal - Hea
t
ing characteristics
will vary depending on base material.
•Glass - Slo
w heat conductor.
Check for flatness by rotating
a ruler across the bottom of
the co
okware (see Figure 1).
Cookware should have flat
bottoms that make go
od con-
tact with the entire surface of
the hea
ting element (see
Figure 2).
Figure 1: Testing cookware
Figure 2: Proper cookware
Do not place empty aluminum, glass, or porcelain-enamel
coated cookware on the element. The melting point of
cookware made with these materials may be reached
quickly, especially if left empty. If the cookware melts it
will damage the cooktop. Follow all the cookware manu-
facturer’s recommendations for use and care of
cookw
a
re.
NEVER place or straddle a cooking utensil over two
different surface cooking areas at the same time.
Incorrect use may damage the cooktop.
IMPORTANT
IMPORTANT
BEFORE SETTING SURFACE CONTROLS