Owner's Guide
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR 
UNPACKING AND INSTALLATION
IMPORTANT - Read and follow the below instruc-
tions and precautions for unpacking, installing, 
and servicing your appliance:
Remove all tape and packaging before using the 
appliance. Destroy the carton and plastic bags 
after unpacking the appliance. Never allow 
children to play with packaging material. Do not 
remove the wiring label and other literature 
attached to the appliance. Do not remove model/
serial number plate.
Cold temperatures can damage the electronic 
control. When using this appliance for the first 
time, or when the appliance has not been used 
for an extended period of time, be sure the 
appliance has been in temperatures above 32ºF 
(0ºC) for at least 3 hours before turning on the 
power to the appliance.
Never modify or alter the construction of the 
appliance by removing the leveling legs, panels, 
wire covers, anti-tip brackets/screws, or any other 
part of the appliance.
Be sure to have an appropriate foam-type fire 
extinguisher available, visible, and easily acces-
sible located near the appliance.
GROUNDING INSTRUCTIONS
Proper Installation—Be sure your appliance is 
properly installed and grounded by a qualified 
technician. In the United States, install in accor-
dance with the National Fuel Gas Code ANSI 
Z223.1/NPFA No. 54, latest edition and National 
Electrical Code NFPA No. 70 latest edition, and 
local electrical code requirements. In Canada, 
install in accordance with CAN/CGA B149.1 and 
CAN/CGA B149.2 and CSA Standard C22.1, 
Canadian Electrical code, Part 1-latest editions 
and local electrical code requirements. Install only 
per installation instructions provided in the litera-
ture package for this appliance.
For personal safety, this appliance must be 
properly grounded. For maximum safety, the 
power cord must be securely connected to an 
electrical outlet or junction box that is the correct 
voltage, is correctly polarized and properly 
grounded, and protected by a circuit breaker in 
accordance with local codes.
It is the personal responsibility of the consumer to 
have the appropriate outlet or junction box with 
the correct, properly grounded wall receptacle 
installed by a qualified electrician. It is the respon-
sibility and obligation of the consumer to contact a 
qualified installer to assure that the electrical 
installation is adequate and is in conformance 
with all local codes and ordinances.
See the installation instructions packaged with 
this appliance for complete installation and 
grounding instructions.
Avoid fire hazard or electrical shock. Failure to 
follow this warning may cause serious injury, 
fire, or death. Do not use an adapter plug, use 
an extension cord, or remove grounding prong 
from the power cord. Failure to follow this 
warning may cause serious injury, fire, or death.
WARNING










