Installation Guide

8
10. Attach the left bottom hinge. Replace both
adjustable feet. Stand the unit upright.
DOOR REMOVAL/REVERSAL INSTRUCTIONS
11 Place the refrigerator door on the lower
hinge. Hold in place while attaching the
middle hinge and then tighten screws.
12 Place the upper door on the center hinge.
Ensure the door is aligned horizontally and
vertically so that the seal is closed on all
sides.
13 Locate the top hinge, remove the pin with
a screwdriver and ip the hinge over. Ret
the pin in the hinge then attach hinge to
the top of the cabinet. Locate the top left
hinge cover (in the accessory bag) and
attach to the unit. On the right side of
cabinet attach the screw cover.
14 Plug in electrical power cord and turn
refrigerator temperature control to center
position. Adjust setting as necessary.
Attach bottom hinge
Attach middle hinge
Attach top hinge & cover