Use & Care Guide

10
DOOR REMOVAL/REVERSAL
8. Using an 8 mm socket with a ratchet:
a. Remove the right top hinge cover
and unsnap the alarm board;
leave the alarm board and wiring
attached to the unit.
b. Remove the top hinge from the
right side.
Φ10
Φ8
c. Remove left top decorative cover.
7. Attach the bottom hinge (A) with
4 screws (B) and the adjustable
leveling foot (C) on the left side of
the cabinet.
x4
B
A
C
Bottom of Unit
Bottom of Unit
IMPORTANT
When you screw on the bottom hinge:
• Move the door slightly to the left or
right to make sure the hinge hole is
aligned with the cabinet hole.
• Insert the 4 screws by half depth, and
then align the hinge and fully tighten.