Use and Care Guide

6
DOOR REVERSAL
1. Using an 8 mm socket with a ratchet (not
supplied), remove the right top hinge
cover and unsnap the alarm board; leave
the alarm board and wiring attached to
the unit. Remove the top hinge from the
right side. Remove the decorative hinge
on the left side.
2. Remove the hinge pin from the right side
hole and reinstall it on the left side hole on
the top hinge using an adjustable wrench.
3. With a at head screwdriver gently pry
upward on hinge pin bearing to remove
from the door. Reinstall on the opposite
side of the door.
4. Remove the door and lay at on a pad-
ded surface. Remove the door stop plate
at the bottom of the door, and reinstall
on the opposite side of door.
5. Lay freezer on its back on a
padded surface.
6. Unscrew the right adjustable leveling
foot (A). Remove the 4 screws (B) hold-
ing the bottom hinge (C) to the cabinet
with an 8 mm socket with ratchet. Screw
the adjustable leveling foot back into the
cabinet hole (D).
Bottom
x4
B C
A
Bottom of Unit
Bottom of Unit
D
IMPORTANT
Before you begin, turn the appliance tem-
perature control to “o” and remove the
electrical power cord from the wall outlet.
Remove any food from door shelves.