Owner Manual
Table Of Contents
- Introduction
- Important Safety information
- Features (Units with Temperature Control Inside)
- Features (Units with Temperature Control Outside)
- Installation
- Door Removal/Reversal (Units with Temperature Control Inside)
- Door Removal/Reversal (Units with Temperature Control Outside)
- Door Handle Installation (some models)
- Controls and Settings (Units with Temperature Control Inside)
- Controls and Settings (Frost-Free Units with Temperature Control inside)
- Controls and Settings (Units with Temperature Control Outside)
- Storage Features
- Care and Cleaning
- Troubleshooting
- Limited Warranty
15
DOOR REMOVAL/REVERSAL
(UNITS WITH TEMPERATURE CONTROL OUTSIDE)
27. Pry out the hinge bearing from
the top of the freezer door with a
flathead screwdriver (see Figure
10A). Install the hinge bearing on
the opposite side of the door (see
Figure 10B).
Figure 10
A
B
28. Reattach the top hinge (B) onto the
left side of the cabinet, using a 5/16”
wrench. Replace the top hinge cover
(A) (see Figure 11).
Figure 11
A
B
CAUTION
Raise the freezer to the upright position
and allow 1 hour before plugging the unit
back into electrical outlet.
29. Plug the freezer power cord back
into the electrical outlet.