FRIGIDAIRE All about the SRO (= of your TABLE OF CONTENTS 2 Care & Cleaning (Cleaning Chart) Care & Cleaning Before You Call Major Appliance Warranty Welcome & Congratulations Important Safety Instructions. Before Setting Surface Controls. Setting Surface Controls www. frigidness USA 1-800-944-9044 www.frigidaire.
WELCOME & CONGRATULATIONS Product Registration Register Your Product The PRODUCT REGISTRATION CARD 7; 1 should be filled in completely, signed and returned to Electrolyte Home Products.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Save these instructions for future reference. AA WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. FOR YOUR SAFETY ~~ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ~ WHAT TO DO IF YOU SMELL GAS: Do not try to light any appliance.
IMPORTANT SAFETY INSTRUCTIONS » DO NOT TOUCH SURFACE BURNERS, GRATES, OR AREAS NEAR THESE BURNERS, Surface burners may be hot even though the flames are not visible. Areas near surface burners may become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cook top and the surfaces facing the cook top.
IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS For personal safety, the cook top must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded. DO NOT operate the cook top using a 2-prong adapter or an extension cord.
BEFORE SETTING SURFACE CONTROLS LOCATIONS OF THE GAS SURFACE BURNERS The SIMMER burner is best used for simmering delicate sauces, etc. The STANDARD sized burners are used for most surface cooking needs. The POWER burner is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. Figure 5 Model FFGC3610 ©. BE.
OPERATING THE GAS SURFACE CONTROLS 1 Place cooking utensil on surface burner. 2 Push the surface control knob down and turn counterclockwise out of the OFF position. 3 Release the knob and rotate to the LITE position (see figure 1}. Note: All four electronic surface seigniors will spark at the same time. However, only the burner you are turning on will ignite. 4 Visually check that the burner has a flame. 5 Turn the control knob counterclockwise to the desired flame size.
CARE & CLEANING (Cleaning Chart) CLEANING VARIOUS PARTS OF YOUR COOK TOP Before cleaning any part of the cook top, be sure all controls are turned OFF and the cook top is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR CLEANING LATER, Surfaces How to Clean Aluminum (Trim Pieces) & Use hot, soapy water and a cloth.
Do not remove any parts from the cook top until they have completely cooled and are safe to handle. Do not operate the surface Burners without the Burner Caps and Burner Heads properly in place. To Clean the surface Burner Caps and Burner Heads Use a soap-filled scouring pad or a mild abrasive cleanser to clean the surface Burner Caps. The ports {or slots) around the Burner Heads must be routinely checked.
MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolyte will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.