Specification
Accessories information available
on the web at frigidaire.com
Built-In Cooktops
FFGC3626S S / W/ B 36" Gas
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
FFGC3626S 02/16 © 2016 Electrolux Home Products, Inc.
Specifications
subject to change.
Built-In Cooktop Specifications
•
Product Shipping Weight (approx.) – 60 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.
•
Amps @ 120 Volts = 1.0
•
Always consult local and national electric and gas codes.
•
Cooktop cutout height includes clearance needed beneath cooktop
to allow for gas supply connection. Recommended location for
grounded 120V outlet is on rear wall in an 8"-wide by 10"-high area,
positioned 22" above floor surface and 4" from right side of cooktop
centerline. Access to underside of cooktop and junction box must
be provided for inspection and service.
•
Cooktop ships with 3/4" factory regulator.
•
LP Gas conversion kit supplied.
•
Overhead cabinetry should not exceed a 13" maximum depth.
•
Absolute minimum horizontal distance between overhead cabinets
installed to either side of appliance must be no less than 30".
•
Allow 34" minimum clearance between top of cooktop platform and
bottom of unprotected wood or metal overhead cabinet.
•
Allow 2" minimum distance between rear edge of cutout and adjacent
combustible surface (or backsplash).
•
Allow 12" minimum required clearance from left edge of cooktop to
adjacent combustible surface and 12" minimum from right edge of
cooktop to adjacent combustible surface.
•
Installation of drawer beneath cooktop requires 6-1/2" minimum
clearance beneath countertop surface, and assured clearance for gas
and electrical connections.
•
To reduce risk of fire when using overhead cabinetry, install range
hood that projects horizontally a recommended minimum of 5"
beyond bottom of cabinets.
•
Gas Drop-In Cooktop model FFGC3610Q is approved to be used over
any Frigidaire® Single Wall Oven.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
•
Granite Countertop Installation Kit – (PN # 903103-9010).
Drop-In Gas Cooktops (Version 3)
(Callouts MUST be charted per individual model to include A through L).
Professional / Gallery / Baseline
13"
max.
cabinet
depth
18"
min.
(
L
)
min.
for
unprotected
cabinet
K
A
B
C
* Includes clearance
needed beneath cooktop
to allow for gas supply
connection
(
J
)
min. from
edge of cutout to front
edge of countertop
25"
min.
24"
E
Plywood base
(optional)
F
*
(
G
) min. between rear
edge of cutout and adjacent
combustible surface
(or backsplash)
Opening to route 48"
power cable & gas supply
if base is present
D
(
H
)
min.
required
from left edge of
cooktop to adjacent
combustible surface
H
(
I
)
min.
required from
right edge of
cooktop to
adjacent
combustible
surface
I
BASED ON LATEST INSTALL GUIDE
VERBIAGE (VERSION 3)
(
G
) min. between rear edge of cutout
and adjacent combustible surface
(or backsplash)
Added: (
L
) min. for unprotected cabinet
- Must update chart by including (
L
)
Product Dimensions
Required Clearances
A - Width B - Depth C - Height G (min.) H (min.) I (min.) J (min.)
36" 21-3/4" 4-1/4" 2" 12" 12" 2-1/4"
Product Cutout Dimensions
K - Cabinet
Opening
Width (min.)
L - For
Unprotected
Cabinet (min.)
Utility Connection Locations
D - Width (min. - max.) E - Depth (min. - max.) F - Height (min.)* Power Supply Gas Supply
33-7/8" - 34-1/4" 19-3/8" - 19-3/4"
8" 36" 34" Right Rear Right Rear