Owners Guide

How the air conditioner works
15
Press the sleep button to activate the
sleep mode. To deactivate, press the
button again.
TIMER button can set the auto-on time
of the unit.
In cooling mode:

controlled.

increase 2
o
F per hour in a 2 hour
period. The set temperature will be
steady for the next 5 hours, then this
mode will be terminated.
In heating mode (only for models with
heating function):

controlled.

decrease 2
o
F per hour in a 2 hour
period. The set temperature will be
steady for the next 5 hours, then this
mode will be terminated.
To set the starting time:
1. Press the "TIMER ON" button to activate the auto start timer function.Auto
start can be set from 0~24 hours. After pressing "TIMER ON" button, "ON"
on the display will blink, and during 5 seconds blinking, the value can be
adjusted by pressing "
+
" or "
-
" button. Every press of this button,1 minute
will be increased or decreased, but continuously press the "
+
" or "
-
" button,
2 seconds later the value will be increased or decreased automalically, and
after 10 minutes increase or decreased, the value will be changed 10 minutes
every 0.5 second; Press the "TIMER ON" button to conform the time.
2. when repressing the "TIMER ON" button, the "TIMER ON" setting will be
canceled.
SLEEP mode(Only for >12000 Btu's)
TIMER Operation
Set
temperature
SLEEP FUNCTION (Cooling mode)
2 °F
2 °F
1 hour1 hour
7 hours
1 hour 1 hour
SLEEP FUNCTION (Heating mode)
7 hours
Set
temperature
2 °F
2 °F