Use and Care Manual
Table Of Contents
- A15294602en
- A15294602sp
- Instrucciones importantes de seguridad
- Características generales
- Instalación
- Instrucciones de desinstalación de la puerta (algunos modelos)
- Conexión de suministro de agua
- Controles
- Características opcionales
- Sonidos y señales normales de funcionamiento
- Cuidado y limpieza
- Antes de solicitar servicio técnico
- Garantía de los electrodomésticos grandes
- A15294602fr
- Consignes de sécurité importantes
- Aperçu des caractéristiques
- Installation
- Notices pour le dépôt et la pose de la porte (certains modèles)
- Connexion d’alimentation en eau
- Commandes
- Options facultatives
- Bruits et éléments visuels d'un fonctionnement normal
- Entretien et nettoyage
- Avant de faire appel au service après-vente
- garantie pour un appareil électroménager
11
WATER SUPPLY CONNECTION
service
mode
service
mode
Green = ON
Figure 1
Brass
Compression
Nut
Water Valve
Bracket
Valve Inlet
Water Valve
Copper water line from
household water supply
Plastic Water Tubing
to Ice Maker
Fill Tube
(Include enough tubing in loop to allow
moving refrigerator out for cleaning.)
Ferrule
(Sleeve)
Copper
5. With steel clamp and screw, secure water
supply line (copper tubing only) to rear
panel of refrigerator as shown.
6. Coil excess water supply line (copper
tubing only), about 2½ turns, behind
refrigerator as shown and arrange coils so
they do not vibrate or wear against any
other surface.
7. To turn ice maker on, press the ice
maker’s On/Off power switch so the LED is
steadily illuminated.
Braided
Flexible
Stainless
Steel
Water Line
Water Valve
Bracket
Valve Inlet
Water Valve
6 ft minimum (1.8 Meters)
Stainless Steel water line from
household water supply
Plastic Water Tubing
to Ice Maker
Fill Tube
(Include enough tubing to allow
moving refrigerator out for cleaning.)
Figure 2
8. Turn ON water supply at shutoff valve and
tighten any connections that leak.
9. Reconnect refrigerator to electrical power
source.