Use and Care Manual
5
WARNING
The anti-tip device must be 
installed according to the 
instructions in your Use & 
Care Manual. Failure to do 
so will result in injury.
WARNING
When reversing the door swing:
You MUST move the anti-tip bracket to align 
with the hinges of the door. Failure to do so 
will result in injury.
NOTE
Raise the front of the refrigerator enough so 
the doors close freely when opened halfway. 
The refrigerator should slope ¼ inch to 
½ inch from front-to-back. Then level the 
refrigerator from side-to-side.
To level the cabinet using the front 
rollers:
  1  Remove the toe grille.
 2 Useaat-bladescrewdriveror⅜inch
socket wrench to raise or lower the front 
rollers (Figure 2).
Figure 4 (some models)
Lower
Anti-tip 
Bracket
Raise
Figure 3
Raise
Figure 2
or
  3  Use adjustable wrench to adjust leveling 
screws. Lower the leveling screws on each 
sideclockwiseuntiltheycontacttheoor
(Figure 3).
 4 Somemodelsareequippedwithananti-
tip bracket (Figure 4). Lower it clockwise 
untilitcontactstheoor.
some models
INSTALLATION










