Complete Owner's Guide
Table Of Contents
- Table of contents
- Questions?
- Product Record and Registration
- Important Safety Instructions
- Before Setting Surface Controls
- Cooktop Controls
- 1
- 1. Lock: Lock the cooktop controls to prevent accidental activation of cooking zones.
- 2. Power: Press to turn on or turn off the cooktop.
- 3. Cooking Zone Power Boil Indicator: Lights when the Power Boil feature is in use on the cooking zone.
- 4. Cooking Zone Setting Indicator: Shows the setting of the Cooking Zone when it is running. Flashes when the Cooking Zone does not detect proper cookware. Shows a Hot Cooktop message (H) when the Cooking Zone is off but still hot.
- 5. Cooking Zone On/Off: Activates the cooking zone when the cooktop is on.
- 6. Cooking Zone Minimum (1): Sets the cooking zone to the minimum power level.
- 7. Cooking Zone Set: Press or slide your finger on the wedge to select the desired cooking zone setting.
- 8. Cooking Zone Maximum (P): Sets the cooking zone to Power Boil.
- 9. Timer Indicator: Shows the time currently left on the timer.
- 10. Reduce Time (-): Reduce the amount of time on the timer.
- 11. Timer On/Off: Turn the countdown timer on or off.
- 12. Increase Time (+): Increase the amount of time on the timer.
- Figure 12: Induction cooking zone control
- 1. Place correctly sized cookware on the cooking zone.
- 2. Activate the cooking zone.
- 3. Set the cooking zone to the desired level (refer to the “Suggested induction cooking zone settings” in Table 1).
- 4. When cooking is complete, turn the induction cooking zone OFF by pressing its On/Off key or the Main Power key before removing the cookware. If all of the zones are off, the cooktop will automatically power off in 20 seconds.
- Suggested induction cooking zone settings
- Frigidaire Induction Recommendations
- Low
- 1
- Keep foods warm
- Medium
- Low
- 2-4
- Continue cooking, poach, stew
- Medium
- 5-6
- Maintain a slow boil, thicken sauces and gravies, steaming, cooking
- Medium
- High
- 7-8
- Continue a rapid boil, fry, or deep fry
- High
- 9
- Start most foods, maintain water at a boil, pan frying, searing
- Power
- Boil
- P
- Start heating pans that contain large amounts of food or to bring pots of water to boil
- Table 1: Suggested induction cooking zone settings
- Moving Cookware on a Smooth Cooktop
- Power Management
- Setting the Timer
- Lock or Unlock the Cooktop
- 1. Set the cooking zones to the desired settings.
- 2. Press the Lock key.
- 1. Press the Power key to turn the cooktop on.
- 2. Press the Lock key and hold it for 4 seconds. The lock will activate, and L will display in all of the cook zone setting indicators.
- 3. Press the Power key to turn the cooktop off.
- 1. Press the Power key to turn the cooktop on.
- 2. Press the Lock key and hold it for 4 seconds. The lock will deactivate.
- 3. Press the Power key to turn the cooktop off.
- 1. Press the Power key to turn the cooktop on.
- 2. Hold the lock key for 4 seconds.
- 3. Set the cooking zones.
- 4. When the cooking process is finished and the cooktop is turned off, the Lock function will be still active.
- Key-Stuck Function
- Home Canning
- Setting Surface Controls
- Care and Cleaning
- Before You Call
19
Solutions to Common Problems:
Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided
with the problem listed.
Problem Cause / Solution
Entire appliance does not
operate.
Power is not connected. Check your fuse box or breaker box to make sure the circuit
is active.
Wiring is not complete. Contact installer or dealer.
Electrical power outage. Check house lights to be sure. Call your local electric
company for service outage information.
Cookware in the cooking zone is
too hot or not hot enough.
Incorrect surface control setting. Adjust power level setting.
Cooking zone does not heat
cookware.
Be sure the correct surface control is turned on for the element needed.
Incorrect cookware used. See “Using Proper Cookware” on page 9.
Cookware is the wrong size or incorrectly positioned in the cooking zone. See “Pan
Sensing” on page 10.
Cooking zone does not heat
evenly.
Cookware is warped. Use only flat, evenly balanced cookware. Flat pans heat better
than warped pans.
Cookware materials and weight of the material affect heating. Heavy and medium-
weight pans heat evenly. Because lightweight pans heat unevenly, foods may burn
easily.
Cooking zone control does not
work
More than one control was pressed at once. Make sure that when trying to set the
control, nothing is touching another control.
Water or soil on the control panel. Clean the control panel.
Areas of discoloration with
metallic sheen on cooktop
surface.
Mineral deposits from water and food. Remove them using cooktop cleaning creme
applied to the ceramic surface. Buff with a non-abrasive cloth or sponge.
Scratches or abrasions on
cooktop surface.
Coarse particles such as salt or hardened soils between cooktop and cookware can
cause scratches. Be sure the cooktop surface and bottoms of cookware are clean
before use. Small scratches do not affect cooking and will become less visible with
time.
Cleaning materials not recommended for ceramic-glass cooktop have been used.
Apply cooktop cleaning creme to the ceramic surface. Buff with a non-abrasive cloth
or sponge.
Cookware with a rough bottom was used. Use smooth, flat-bottomed cookware.
Metal marks on the cooktop. Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils
on the cooktop surface. Apply cooktop cleaning creme to the ceramic surface. Buff
with a non-abrasive cloth or sponge. For more information, see
“Cooktop Cleaning”
on page 18.
Brown streaks or specks on
cooktop surface.
Boil overs stuck on the surface. When cooktop is cool, use a razor blade scraper to
remove soil. For more information see
“Cooktop Cleaning” on page 18.
BEFORE YOU CALL