Use and Care Guide
Table Of Contents
- Table of contents
- Questions?
- Product Record and Registration
- Important Safety Instructions
- Before Setting Surface Controls
- Cooktop Controls
- 1
- 1. Lock: Lock the cooktop controls to prevent accidental activation of cooking zones.
- 2. Power: Press to turn on or turn off the cooktop.
- 3. Cooking Zone Power Boil Indicator: Lights when the Power Boil feature is in use on the cooking zone.
- 4. Cooking Zone Setting Indicator: Shows the setting of the Cooking Zone when it is running. Flashes when the Cooking Zone does not detect proper cookware. Shows a Hot Cooktop message (H) when the Cooking Zone is off but still hot.
- 5. Cooking Zone On/Off: Activates the cooking zone when the cooktop is on.
- 6. Cooking Zone Minimum (1): Sets the cooking zone to the minimum power level.
- 7. Cooking Zone Set: Press or slide your finger on the wedge to select the desired cooking zone setting.
- 8. Cooking Zone Maximum (P): Sets the cooking zone to Power Boil.
- 9. Timer Indicator: Shows the time currently left on the timer.
- 10. Reduce Time (-): Reduce the amount of time on the timer.
- 11. Timer On/Off: Turn the countdown timer on or off.
- 12. Increase Time (+): Increase the amount of time on the timer.
- Figure 12: Induction cooking zone control
- 1. Place correctly sized cookware on the cooking zone.
- 2. Activate the cooking zone.
- 3. Set the cooking zone to the desired level (refer to the “Suggested induction cooking zone settings” in Table 1).
- 4. When cooking is complete, turn the induction cooking zone OFF by pressing its On/Off key or the Main Power key before removing the cookware. If all of the zones are off, the cooktop will automatically power off in 20 seconds.
- Suggested induction cooking zone settings
- Frigidaire Induction Recommendations
- Low
- 1
- Keep foods warm
- Medium
- Low
- 2-4
- Continue cooking, poach, stew
- Medium
- 5-6
- Maintain a slow boil, thicken sauces and gravies, steaming, cooking
- Medium
- High
- 7-8
- Continue a rapid boil, fry, or deep fry
- High
- 9
- Start most foods, maintain water at a boil, pan frying, searing
- Power
- Boil
- P
- Start heating pans that contain large amounts of food or to bring pots of water to boil
- Table 1: Suggested induction cooking zone settings
- Moving Cookware on a Smooth Cooktop
- Power Management
- Setting the Timer
- Lock or Unlock the Cooktop
- 1. Set the cooking zones to the desired settings.
- 2. Press the Lock key.
- 1. Press the Power key to turn the cooktop on.
- 2. Press the Lock key and hold it for 4 seconds. The lock will activate, and L will display in all of the cook zone setting indicators.
- 3. Press the Power key to turn the cooktop off.
- 1. Press the Power key to turn the cooktop on.
- 2. Press the Lock key and hold it for 4 seconds. The lock will deactivate.
- 3. Press the Power key to turn the cooktop off.
- 1. Press the Power key to turn the cooktop on.
- 2. Hold the lock key for 4 seconds.
- 3. Set the cooking zones.
- 4. When the cooking process is finished and the cooktop is turned off, the Lock function will be still active.
- Key-Stuck Function
- Home Canning
- Setting Surface Controls
- Care and Cleaning
- Before You Call
6
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR USING
YOUR INDUCTION COOKTOP
Know which knob or key controls each surface
heating area. Place cookware with food on the
cooking area before turning it on. Turn the
cooking area off before removing the cookware.
Cookware handles should be turned inward and
not extend over adjacent surface elements. — To
reduce the risk of burns, ignition of flammable
materials, and spillage due to unintentional
contact with the utensil, the handle of the
cookware should be positioned so that it is turned
inward, and does not extend over other cooking
areas.
Glazed cooking utensils — Only certain types of
cookware are suitable for cook top service and
must be magnetic to work properly on the
induction zones. Check the manufacturer’s
recommendations for cook top use to ensure that
the cookware is compatible with induction
cooking.
Improper cookware may break due to sudden
changes in temperature. Check the cookware
manufacturer’s recommendations for cooktop
use.
Use proper pan size - This appliance is equipped
with one or more surface units of different sizes.
Select cookware with flat bottoms that match the
surface unit size. Using the proper cookware on
the cooking area will improve efficiency.
Never leave surface elements unattended. Boil-
overs may cause smoking and greasy spills that
may ignite. A pan that has boiled dry could be
damaged and may damage the cooktop.
When you are flaming foods under a ventilating
hood, turn on the fan.
IMPORTANT INSTRUCTIONS FOR GLASS
AND CERAMIC COOKTOPS
Do not clean or operate a broken cooktop. If
cooktop should break, cleaning solutions and
spillovers may penetrate the broken cooktop and
create a risk of electric shock. Contact a qualified
technician immediately.
Clean cooktop glass with caution. If a wet sponge
or cloth is used to wipe spills on a hot cooking
area, be careful to avoid a steam burn. Some
cleaners can produce harmful fumes if applied to
a hot surface.
Avoid scratching the cooktop glass with sharp
objects.
Do not attempt to operate the appliance during
a power failure. If the power fails, always turn off
the appliance. If the appliance is not turned off
and the power resumes, electric surface
elements may resume operation when power is
restored. Once the power resumes, reset the
clock (if equipped).
Persons with a pacemaker or similar medical
device should exercise caution using or
standing near an induction unit while it is in
operation, as the electromagnetic field may
affect the working of the pacemaker or similar
medical device. It would be advisable to consult
your doctor or the pacemaker or similar medical
device manufacturer about your particular situa-
tion.
CAUTION
CAUTION