Wiring Diagram

WASHER ERROR CODES

Washer Error Code Table

From any cycle position, press and hold Wash Temp and CANCEL buttons for 15 seconds to display the last error code.

Recalling Last Error Code:

Error

Code

Error Description Display

Notication

Next Step

E11 Fill time too long Yes Refer to test (1)

E13 Water leak in tub or in pressure sensor No Refer to test (2)

E21 Water not pumping out fast enough Yes Refer to test (3)

E23 Drain triac error No Refer to test (3)

E24 Drain triac error sensing No Refer to test (3)

E31 Electronic pressure switch error No Refer to test (4)

E32 Pressure sensor calibration problem No Refer to test (4)

E35 Pressure sensor indicates water overll No Refer to test (5)

E41 Control board thinks the door switch is open Yes Refer to test (6)

E42 Door lock device failure No Refer to test (6)

E44 Door closed sensing failure No Refer to test (6)

E45 Line door sensing failure No Refer to test (6)

E51 Motor triac error No Main board failure

E53 Motor triac sensing error No Main board failure

E54 Motor relay error No Main board failure

E91 User interface protocol incongruence error Yes Refer to test (11)

E92 User interface mother board protocol incongruence No Refer to test (11)

E93 Console or main board control problem (incompatible machine conguration) Yes Refer to test (11)

E94 Main board control problem (incompatible cycle conguration) Yes Refer to test (10)

E97 Console or main board control problem (incompatible cycle conguration) Yes Refer to test (11)

E9C User interface conguration problem Yes Refer to test (11)

EB1 Frequency of power out of limits Yes Refer to test (18)

EB2 Supply voltage too high (incoming voltage) Yes Refer to test (18)

EB3 Supply voltage too high (incoming voltage) Yes Refer to test (18)

EF5 Load unbalanced No Redistribute load and restart

EF6 Control reset No Refer to test (19)

EC6 Clutch error. Clutch positioning timeout reach or failure to stay in desired

position

No Clutch mechanism failure

Main board failure

Wire/connection problem

EC7 Sensing that the clutch triac is out of limits No Clutch mechanism failure

Main board failure

Wire/connection problem