Installation guide

Connecting venting

:1. Remove the two screws (items A, to the right)

securing the dryer front access panel to the

dryer cabinet, Lift the panel until the tabs can be

disengaged from the cabinet, remove the panel and

set aside.

2 Connect the exhaust duct to the outside exhaust

system, Use of a 4" (!0.2 cm) damp (item B, to the

right) is recommended to connect the dryer to the

exhaust vent system. Use metal foil tape to seal ait

other joints,

3 ReinstaJJ the dryer front access panel

4 Carefully slide the laundry center to its final

position. Recheck for level and rock corners for

stability,