Owner's Manual

11
2009 Electrolux Home Products, Inc. All rights reserved.
(continued)
Operating Instructions, CARE & CLEANING
ADDITIONAL THINGS
YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in
your control that you should become familiar with.
Clean your air conditioner occasionally to keep it looking new. Be sure to unplug
the unit before cleaning to prevent shock or fire hazards.
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned
off and on quickly. This prevents overheating of the compressor and possible circuit
breaker tripping. The fan will continue to run during this time.
Temperature can be set
between 62 °F and
86 °F (17 °C and 30 °C).
There is a 2-Second delay for the compressor shutting down when selecting
FAN ONLY/HEAT. This is to cover the possibility of having to roll through to select
another mode.
After a power outage, the unit will memorize the last setting and return the unit to
the same setting once power is restored.
CARE & CLEANING
Replace the filter after the filter is dry.
If you plan to store the appliance during the winter, cover it with plastic or return
it to its carton.
Winter Storage
Be sure to unplug the air conditioner to prevent shock or fire hazard. The cabinet
and front may be dusted with an oil-free cloth or washed with a cloth dampened
in a solution of warm water and mild liquid dishwashing detergent. Rinse
thoroughly and wipe dry.
Cabinet Cleaning
Never use harsh cleaners, wax or polish on the cabinet front.
The control is capable of displaying temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other and back, press and hold the "TEMP"
Up ( ) and Down ( ) buttons together for 3 seconds.
Filter A
Fig. 25
Fig. 26
R
em
o
ve three
s
crews
a
n
d
t
a
ke the
a
ir
i
ntake
g
rille
do
w
n
R
em
o
ve the filter B
o
ut from the
g
rill
e
F
il
te
r
B
Be sure to wring excess water from the cloth before wiping around the controls.
Excess water in or around the controls may cause damage to the air conditioner.
Fig. 24
T
his unit has two filters, the
y
are filter A and B. Gras
p
the u
pp
er
p
anel tab and
take off the filter A which behind the
g
rill of the back panel (Fi
g
.24). Remove the
l
ower filter B by loosenin
g
the screws. Take down the air inlet
g
rille, then remove
the air filter as shown in Fi
g
.25 & 26.
Air Filter C
l
ean
i
n
g
W
ash the filter usin
g
liquid dishwashin
g
deter
g
ent and warm water. Rinse filter
thorou
g
hly. Gently shake excess water from the filter. Be sure filter is thorou
g
hly
dry before replacin
g
.
O
r
,
r
r
i
nste
ad
o
f
w
a
shi
ng
y
ou
ma
y
v
a
c
uu
m the fil
te
rcle
a
n.
Indoor operatin
g
temperature ran
g
e for this product is 62 °F to
95
°F
(
17 °C to
3
5
°C
)
.
Operating Instructions