This USE & CARE MANUAL provides specific instructed in this USE A CARE MANUAL may occur Common sense and caution The power this air conditioner detection of fire. supply device cord Please refer to the section Current Device' for details. a current to reduce the 'Operation of In the event that the power supply cord damaged, it cannot be repaired. It must replaced with manufacturer.
CAUTION. I Avoid Injury • Provide occasional ventilation units run excessively. Do not climb on or place Do not hang objects Do not place containers Turn objects off the check the use. on outdoor part liquids at the condition on the power of the Ensure that or cover the intake grille, any electrical/electronic Do not use or store airflow of the to the unit or other at fireplaces flammable when gases not be used accessories fins unit.
Product Registration Record Your Model and Serial Numbers Record in the space provided below the model and serial numbers. serial plate is located on the outside of the cabinet. Model No. Serial No Register Packaging Your On all models, Product The self-addressed PRODUCT REGISTRATION CARD should signed and returned to the Frigidaire Company.
Air Conditioner Features ELECTRONIC CONTROL Before you begin, thoroughly familiarize yourself as shown below and all its functions, then follow desire, The unit can be controlled by the touch with the control panel and remote the symbol for the functions you pad alone or with the ADJUSTS TEMPERATURE-- remote, DISPLAYS OR TIME TEMPERATURE/TIME temp/timer TURNS UNIT ON-I-_------_ON OFF 2o0af_to see tf [i_e_ cool ....
Operating Instructions (continued) TO CHANGE TEHPERATURE SETTING; YOU WILL SEE: Note: Tap or hold either DO THIS: ) or down( V ) tained anywhere between 60 °F (t6 °C) and 90 °F (32 °C), If you want the display to read the actual ^ TO room temperature. tern#/timer RAISE i0N-i section PRESS up( A button until the desired temperature is seen on the display, This temperature will be automatically main- See "To Operate on Fan Only" on Page 7.
Operating Instructions (continued) TO OPERATE ON FAN ONLY: YOU WILL SEE; {B i i Note: °[[ ) OFF J ) for maximum cod menergy saver I itan cooling [,o°, PRESS MODE efficiency) You can choose any room temperature, the cooling mode not the set temperature Note: the fan remains as in BU_ON speed t mer is not or to exhaust fan speed you prefer (Except "Auto Fan") During this function, the display will show the actual hi f_no_y mode only when cooling such as for room air circulat
Operating Instructions (continued) CHECK FILTER FEATURE, YOU WILL SEE: m _emp/dmar temp/timer Note: This feature ON- is a reminder OfF to clean the Air Filter (See Care Jananly Io ' _ i fa. i imodei ispeed I _ if ter] it_mor _} and Cleaning) for more efficient operation, The LED (light) will illuminate after 250 hours of operation. jb_on*y • :o imodel To reset after cleaning r the filter, press the "Filter Reset" button and the light will go off.
ADDITIONAL Now that you have mastered • The "Cool" the operating circuit has an automatic This prevents to run during ® There is a 2-Second to roll through The control • After outage, AUGER here are more features 3 minute time delayed of the compressor in your control that you should start if the unit is turned and possible circuit breaker tripping. become familiar with. off and on quickly The fan will continue this time.
Before calling forservice, review this list, Itmay save you time and expense This listincludes common occurrences that are not theresult ofdefective workmanship ormaterials inthis appliance OCCURRENCE SOLUTION Air conditioner willnot operate. Wall plug disconnected. Plug Current House fuse Control Air _om unitdoesnotfeelcold 60°F blown Push plug Tripped. temperature breaker Control betow firmly Press the or circuit is OFF. Turn Room enough, Device ON 60°F into wall RESET tripped.
Your appliance is covered by a limited two-year warranty and a limited 3-5 year warranty on the sealed system (the compressor, condenser, evaporator and tubing). For two years from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.