Wiring Diagram

SERVICE DATA SHEET
P/N: A02841501 Rev.B
Artwork: A02841501 Rev.002
This information is intended for use by persons having electrical and
mechanical training and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade. Electrolux Home
Products North America cannot be responsible, nor assume any liability,
for injury or damage of any kind arising from the use of this Service
Data Sheet.
BK............Black
BU............Blue
PK............Pink
R..............Red
Viol..........Violet
W.............White
Y..............Yellow
R-Y.........Red/Yellow
R-BK......Red/Black
COLOR CODE
OPERATION
DISPLAY CODES (LED)
WIRING DIAGRAM
CYCLE SELECTION OPTIONS
To start ----------------- Close door fully to latch. Press START/CANCEL pad.
To delay start --------- Close door fully to latch. Press DELAY START pad to
select desired delay time.
To select a new cycle
or option -------------
Press desired cycle and/or option pad. The indicator
lights will change. Press START/CANCEL within 15 seconds
to begin cycle.
To cancel
a cycle ---------------- Press START/CANCEL. Dishwasher will drain for 90 seconds,
then shut off.
To cancel
a cycle ---------------- Press and hold the AIR DRY pad for 3 seconds.
To unlock, press and hold the AIR DRY pad for 3 seconds.
WASHING---------- Wash portion of cycle.
SANITIZED--------- The SANITIZED criteria has been met. Indicator light will switch off when door is opened.
DRYING------------- Drying portion of cycle.
CLEAN--------------- Shows completion of cycle. Indicator light will switch off when door is opened.
OPTION LEDs Flashing- When ALL LED’s are fl ashing this indicates power failure has occurred. Press START/CANCEL pad
and re-select desired options and cycles.
WATER/SERVICE TEST
The water/service test, (WST)
is a special function initiated
from the power failure mode
or idle mode.
While in power failure mode -
simultaneously press the AIR DRY
and START/CANCEL pads for 1
1
/
2
seconds. While in Idle Mode,
simultaneously press HI-TEMP
WASH and START/CANCEL pads
for 6 seconds.
The dishwasher will then step
through the test cycle per the
chart. Pushing the START/CANCEL
pad will advance the dishwasher
to the next step.
E
lectr
onic
S
eries
Disconnect electrical
power at the fuse box
or circuit breaker box
before servicing under this
product. Electrical power
may be present on some
parts under this product,
even if not in use.
Failure to follow this
warning could result in
serious injury or death.
WARNING
Interval Number
Description
1
2
6
4
3
5
7
8
Fill/Det. Dispenser
Fill
Wash/Heat/Det. Disp.
Wash/Heat/Det. Disp.
Wash/Heat
Pause/Heat
Drain
Dry Heater On/Drain
End State
Interval Duration
(sec)
60
27
60
0.4
75
60
90
90
Water Valve
Circulation Motor
Drain Motor
Heater
Dispenser
Clean LED
Washing LED
Drying LED
Sanitize LED
0
Fill Number
1
1
1
1
1
1
1
1
9 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 1
1
1
1
1
1
0
0
0
0
0
0
0
0 0
0
0
0
0
0
0
0
0
0
0
0
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 0
0
0
0
0 0 0

Summary of content (2 pages)