Installation Instructions

REVERSI NG DOOR

5 Remove the striker plate and the latch plate from the front

panel.

6 Reinstall each plate in the opposite position with the same

screws removed in previous step.

8 Close the door and test operation of hinge, strike and

latch.

7 Grasping ﬁ rmly the top of the door, position the door

near the door opening and align the top hinge hole to

the top hole in the front panel door opening. Attach the

upper hinge to the front panel with one screw. Once the

ﬁ rst screw is started, attach the second screw to the

lower hinge. Once both screws are tightened, install the

remaining two screws.

FRONT PANEL

HINGE SCREWS (x 4)