Use and Care Manual

ALARMS

Power Fail

In the event of a power failure, the ‘power fail’ alarm will sound three times. The ‘power fail’

alarm is an audible alarm only and does not display in the control panel.

High Temperature

Whenawarmrefrigeratorisrstpoweredon,the‘powerfail’alarmwillsoundandthecurrent

set points will be displayed for a few seconds. After 20 minutes the ‘high temp’ alarm will sound

if the freezer temperature is above 26°F or if the refrigerator temperature is above 55°F (or both

are above).

If the unit is above the temperatures mentioned in the paragraph above, the affected

compartment temperature display (refrigerator, freezer or both) on the control panel will

display ‘HI’ and an alarm will sound. To disable the alarm press any key on the control panel.

After which the control panel will then show the display temperature. The unit will continue

to monitor the product temperatures for ‘high temp’ condition every 20 minutes. If the ‘high

temp’ condition persists, the alarm will sound again and can be reset again. Contact a customer

service representative if the high temp alarm continues.

The audible portion of the alarm will silence itself once the product temperature is below 26°F

for the freezer temperature and 55°F for the refrigerator temperature. The control panel will still

show ‘HI’ until it is acknowledged by the user by pressing any key on the control panel. After

which the control panel will then show the display temperature.

CONTROLS

IF TEMPERATURE DISPLAYS FLASH...

Ifeveryousee“OP”or“SH”ashing,itmayindicatethatthecontrolsystemhasdetecteda

performanceproblem.Callyourservicerepresentative,whocaninterprettheashingmessage.

To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For

good circulation, do not block cold air vents with food items.

Numeric Display

Freezer Refrigerator

Warmest 1 1

Factory Setting 6 6

Coldest 9 9



NOTE

The advanced electronic control system in your refrigerator includes additional display modes

that service professionals can use to rapidly diagnose performance issues.