Installation Instructions

Existing Frigidaire sleeves may have older single sided intake grilles

New Dual Intake Grille

IMPORTANT

This units increased performance characteristics is the result of having two rear intakes.

If there is an existing sleeve and rear grille, it should be replaced with the one shipped with the unit in the

accessory kit.

It is very important that these installation instructions are followed so your unit can operate at maximum efficiency.

1. Remove the existing grille and save the mounting

screws.

2. Place the grille included with your new air conditioner

towards the inside rear of the sleeve.

3. Attach the new grille by aligning the four mounting

holes.

4. Re-insert the self-tapping screws into the nylon

retainers.

• These grilles should be replaced with the dual intake grille supplied with the air conditioner.

Left Intake Grille

Left Intake

Right Intake Grille

Right Intake

Installation Instructions