Installation guide

EXCESSIVE WEIGHT HAZARD
Avoid back or other injury. Use more than one person to
move, lift or tip the washer.
ELECTRICAL SHOCK HAZARD
Washer must be properly grounded at all times.
IMPORTANT
Please read all safety instructions before using
your new high efficiency washer. For best washing
results with your new washer, remember to review:
,,'1INSTALLATION INSTRUCTIONS
,/ USE & CARE GUIDE
NOTE TO
INSTALLER
Leave these instructions
with the customer.
k
CART FROM REAR DO N0T USE KNE-
ONLY WITH 7, (MINt) DO NOT CART DO NOT CART IN CABINET SIDE _
CART FORKS FROM FRONT FROM SIDE TO MOVE UN T
REMOVE
NOTE: INLET HOSES ARE NOT INCLUDED WITH PURCHASE. SEE "ACCESSORIES" SECTION iN iNSTALLATiON INSTRUCTIONS FOR INFORMATION ABOUT VARIOUS
HOSE KiTS TO FiT YOUR SPECIFIC iNSTALLATiON NEEDS.
\
ANTI-SIPHON
DISC
B)
INSTALL DRAIN HOSE AND
SPRING CLAMP COMPLETELY
COLD
(BI E)
HOT
(RI !U)
INSTALL HOT HOSE ON HOT INLET, COLD
HOSE ON COLD INLET (HAND-TIGHT)
"_ SLIDE DISC
TO HERE
/
c)
E)
DETERMINE USE ONLY NEW HOSES,
HOT SUPPLY VERIFY RUBBER WASHERS
ARE iN PLACE (x4)
\
DRAIN HOSE
RETAINER
14\ TIGHTEN ADDITIONAL TURN ON WATER,
2/3 TURN WITH PLIERS CHECK FOR LEAKS
[
33" min
(84cm min)
INSTALL H_
ON HOT SUPPLY,
COLD HOSE ON COLD
SUPPLY (HAND-TIGHT)
j) SECURE DRAIN HOSE
WITH SUPPLIED CABLE TiE
AL
2/3 TURN WiTH PLIERS
K)
CONNECTTO
GROUNDED OUTLET,
DO NOT REMOVE
GROUNDING PRONG
REMARQUE POUR
L'INSTALLATEU R
Laissez ces instructions au
client.
Suite de la version frangaise au verso.
NOTA AL
INSTALADOR
Deje estas instrucciones
con en cliente.
Espa_ol continua en la pagina trasera.
LEVEL BOTH WAYS CORNER_TO,CORNER
LOAD SIZE SENSING
/
N_TE
Water level is automatically calc@ated by the washer. The washer
will perform a dry load sensing procedure to determine load size
before adding water to the tub. If your model has status lights, the
"sensing" indicator will be lit.
@ O O _')
sensing ac_8 a garmenv wash fina{ s E ctean