Complete Owner's Guide

16
SOLUTI ONS TO COMMON WASHI NG I NQUI RI ES
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory
washing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM POSSI BLE CAUSES SOLUTIONS PREVENTIVE MEASURES
Blue stains Undiluted liquid detergent
or fabric softener dispensed
directly onto fabric.
I f caused by detergent, mix 1 cup (240
ml) white vinegar with 1 quart (.95 L)
water in a plastic container. Soak item 1
hour. Rinse.
I f caused by fabric softener, rub stains
with bar soap. Wash.
Add detergent to empty tub. Do not pour
on dry load.
Avoid over lling fabric softener compart-
ment of dispenser.
Discoloration,
graying
Not enough detergent.
Wash water temperature
too low.
I ncorrect sorting.
Rewash with correct amount of deter-
gent and hottest water safe for fabric.
Add bleach safe for fabric.
Sort items by soil level and color.
Use correct amount of detergent, hottest
water and bleach safe for fabric.
Greasy, oily stains Not enough detergent.
Undiluted liquid fabric
softener poured directly on
fabric.
Treat with prewash stain remover or
liquid detergent.
I ncrease detergent and water tempera-
ture. Rewash.
Rub fabric softener stains with bar soap.
Use correct amount of detergent and
hottest water safe for fabric.
Do not pour liquid fabric softener directly
on fabric. See Operating Your, step 5.
Holes, tears, or
snags
I ncorrect use of chlorine
bleach.
Unfastened zippers, hooks,
buckles.
Rips, tears and broken threads.
Overloading the washer.
Degradation of fabric.
May be irreversible if rips, tears and
seams cannot be mended.
Never pour chlorine bleach directly on
fabric.
Check condition of items before washing.
See Operating Your, steps 2 and 5.
Lint I ncorrect sorting.
Tissues left in pocket.
Overloading the washer.
Not enough detergent.
Undissolved detergent has left
a residue resembling lint.
Stat ic cling is attracting lint.
Load washed too long.
Reduce load size. Rewash using correct
water temperature, water level, and
amount of detergent.
Add nonprecipitating water conditioner to
wash water to remove detergent residue.
Add liquid fabric softener to nal rinse.
Dry load in dryer.
Remove lint with lint brush or roller.
See Washing Procedures, steps 1 and 2.
Do not overload washer.
Use correct temperature and amount of
detergent, water and wash time.
Pilling
(Fibers ball up and
cling to fabric.)
Pilling is normal with synthet ic
and permanent press fabrics.
This is due to abrasion from
normal wear.
Use a lint brush or shaver t o remove
pills.
Use fabric softener in the washer t o
lubricate bers.
When ironing, use spray starch or fabric
nish on collars and cuffs.
Turn items inside out t o reduce abrasion.
Residue or powder
on dark items;
Stiff, harsh fabrics.
Undissolved detergent.
Some granular detergents
can combine with hard water
minerals to form a residue.
Overloading the washer.
Rewash load. I ncrease water temperature using hottest
water safe for fabric.
Do not overload washer.
Use liquid det ergent or use nonprec-
ipitating water conditioner with powder
detergent.
Wrinkling Overloading the washer.
I ncorrect wash cycle for
wash load.
Reduce load size.
Rinse in cold water with liquid fabric
softener using the casual or delicate
cycle.
Do not overload washer.
Remove items from washer as soon as
cycle is completed.
Use liquid fabric softener.
Yellow buildup
of body soil on
synthetic fabrics
Agitation time too short.
Wash water temperature
too low.
Not enough detergent.
Soak in detergent booster or product
containing enzymes.
Wash in hottest water safe for fabric
using casual cycle.
I ncrease detergent.
Add bleach safe for fabric or treat with
color remover.
Select correct wash cycle.
Use correct amount of detergent.
Wash synthetics frequently using hot or
warm water.
Yellow or brown rust
stains
I ron or manganese in water
supply, water pipes, or water
heat er.
To restore discolored load of whites, use
rust remover safe for fabric.
Do not use chlorine bleach to remove
rust stains. It may intensify discolor-
ation.
Use nonprecipitating water softener.
Before washing, run hot water for a few
minutes to clear lines.
Drain water heater occasionally.
For an ongoing problem, install an iron
lter in your water supply system.