Owner's manual

10
DOOR REMOVAL/REVERSAL
8. Using an 8mm socket with a ratchet:
a. Remove the right top hinge cover
and unsnap the alarm board;
leave the alarm board and wiring
attached to the unit.
IMPORTANT
When you screw on the bottom hinge:
• Move the door slightly in left or right
direction to make sure that hinge hole is
aligned with cabinet hole.
• Insert the 4 screws by half depth, then
align the hinge and fully tighten.
b. Remove the top hinge from the
right side.
Φ10
Φ8
c. Remove left top decorative cover.
7. Attach the bottom hinge (A) with 4
screws (B) and adjustable leveling
foot (C) on the left side of the
cabinet.
x4
B
A
C
Bottom of Unit
Bottom of Unit