Owner's manual

9
IMPORTANT
Before you begin, turn the appliance tem-
perature control to “o” and remove the
electrical power cord from the wall outlet.
Remove any food from door shelves.
DOOR REMOVAL/REVERSAL
1. Keep the 2 plastic door spacers
between door and cabinet as shown
below. The spacers are used to make
sure the distance between door and
cabinet is 1/2 inch.
2. Lay the freezer on its back on a
padded surface.
3. Unscrew the right adjustable leveling
foot (A). Remove the 4 screws (B)
holding the bottom hinge (C) to
the cabinet with an 8 mm socket
with ratchet. Screw the adjustable
leveling foot back into the cabinet
hole (D).
CAUTION
This procedure will require 2 people to
safely perform.
x4
B C
A
Bottom of Unit
Bottom of Unit
D
4. Unscrew the door stopper on right
side with Phillips screw driver and
pry o the stopper with flathead
screw driver. Then screw it on the left
side.
6. Unscrew the left adjustable leveling
foot and loosen the screw.
Bottom of Unit
5. Unscrew and insert the hinge pin on
the opposite side of the bottom hinge
using an adjustable wrench and pliers.
Φ10