Installation Instructions

• Tape measure

• Hole saw

• Stud finder or hammer

• Level

• Duct and masking tape

• Scissors

• #1 Phillips screw driver

• Electric drill

• 3/16”, 1/2”, 5/8” drill bit

• Filler wood blocks for recessed

bottom cabinets

• Tin snips

Mounting Space

Tools you will need:

• The space between the cabinets must be 30" (76.2 cm) wide and free of obstructions.

• If you are going to vent your microwave oven to the outside, see Hood Exhaust Section for exhaust

duct preparation

• When installing the microwave oven beneath smooth, flat cabinets, be careful to follow the

instructions on the top cabinet template for power cord clearance.

• As a guide to installation, see page 26 for Mounting Template Information.

• If the cabinet depth, including the cabinet doors, is more than 13”, then the unit must be spaced out

from wall using adequate materials supporting 150 lbs to allow proper top vent air exhaust/intake.

66"

(167.6 cm)

or more from the

floor to the top of

the microwave

¼" Min

13" Max

(33 cm)

16 ½"

(41.9 cm)

Backsplash

(76.2 cm)

min.

Cabinet

(5.1 cm)

Cabinet

Clearance

(33 cm)

13" MAX.

"(76.2 cm)

EN-5