& Cleaninq... jor At: iance Warra ................ 19 ,_ ......
Please read all instructions this appliance. before using Definitions _This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Doors 53 Handles are secure and tight 53 Door seals completely to cabinet on all sides 53 Door is level across the top Leveling DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Risk of child entrapment Electrical Information Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous - even if they will sit for "just a few days" If you are getting rid of your old appliance, please follow the :: instructions below to help prevent accidents. :: These guidelines must be followed to ensure that safety mechanisms in the design of this appliance will operate properly.
Understanding Features and Terms Your Frigidaire appliance is designed for optimal convenience and storage flexibility. The illustration below is provided to assist you with familiarizing yourself with product features and terminology. Features may vary according to model.
Required Tools You will need the following tools: This Use & Care Guide provides general operating instructions for your model. Use the unit only as instructed in this Use & Care Guide. Before starting the appliance, follow these important first steps. Location Choose a place that is near a grounded electrical outlet. Do Not use an Phillips TM Head or #2 Square Head extension cord or an adapter plug.
Door Handle Hounting Instructions 1. Remove handle from carton and any other protective packaging. 2. Position handle end caps over upper and lower pro-installed shoulder bolts (A) that are fastened into door, ensuring the holes for the set screws are facing towards the outside of door if a single unit installation or the refrigerator door (if installing the matching refrigerator). 3. While holding handle firmly against door, fasten upper and lower Allen set screws (B) with supplied Allen wrench. 4.
Kick Plate Removal Leveling To remove the kick plate, use a Phillips head screwdriver and remove the two screws Use the lower hinge adjustment to fine tune the door height and for final cabinet spacing. Use a 7/16" socket or wrench to adjust the screw at the bottom of the lower hinge. holding the kick plate to the cabinet. the kick plate away from the unit.
If doormust beremoved: Unplug theunitorswitch thebreaker that supplies power totheunittothe Doors areheavy. Twopeople are offposition. recommended toremove orreplace thedoor assembly from the cabinet. Remove theplastic tophinge cover. Hold thedoorinplace while removing the tophinge fromthecabinet. _ Hinge Cover Remove thetwo3/8"hexhead bolts fromthetophinge witha3/8"wrench or _i @_== Hinge Bolts (2) socket.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!ii_i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii To turn the appliance OFF, press the UP ('_) key until the warmest temperature setting of 10°F (-12°C) shows in the display. Then press the UP (A) key 3 times within 3 seconds to turn the unit OFF.
The Sabbath mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community. To initiate or exit Sabbath Mode, press and hold the CONTROL LOCK and TEMP MODE keys for 3 seconds. Then "Sb" will be displayed on the control panel indicating that the unit is in Sabbath mode. In the Sabbath mode, the High Temp alarm is active for health reasons.
Temp Sensing Error Alert The sensor alert signals you that a problem exists with a temperature sensor. The audible alarm will sound after 1 hour and the display will alternate between "E8" or"E9" and -10°F (-23°C) at half- second intervals. The control will then enter a mode that runs the unit in a manner that maintains the factory set cabinet temperature. The audible alert can be turned off by pressing the ALERT RESET key.
To avoid electric shock, which can cause death or severe personal injury, disconnect the the freezer, • Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of 1/4inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line.
Plastic Water Tubing to Ice Maker Fill Tube 3 rass Compression Nut (Sleeve) Steel water Line / water line , Water Valve Bracket -Water Valve Bracket -Valve Inlet L-Valve Inlet ,=rValve / opper water line from household wate[ supply dndude enough tubing in loop to allow moving refrigerator out for cleaning:) Figure A, Copper Water Line Connection ', Stainless Steel water line from household water supply Figure B, Stainless Steel Water Line Connection 5.
Ifyour freezer hasanautomatic icemaker, itwill provide asufficient supply oficefornormal use. During theinitial startup ofyourfreezer, however, noicewillbeproduced during thefirst24hours ofoperation. Automatic icemakers arealso optional accessories thatmaybeinstalled insome models atanytime. Callyour local dealer forinformation. Turning Your Ice Maker On After the plumbing connections have been completed, the water supply valve must be opened.
Hid-Level 4. Replace LED light and snap in place assuring the light is facing in toward the unit (inside fresh food). Lighting (some models) The mid level and upper level lighting comes on automatically when the door is opened. To disconnect power to the unit, unplug the unit or switch the breaker that supplies power to the unit to the off position.
SpaceWise width bins are removed in the same manner as TM Glass Shelves the adjustable two-liter door bins. MultFposition adjustable slideout glassshelves can be moved toany position forlargeror Soft Freeze Zone smallerpackages.The shippingspacersthat Soft Freeze Zone is stabilize the shelvesforshippingmay be specifically designed removed and discarded. to maintain a higher To Adjust The Shelves temperature than the rest of the freezer to store • Lift frontedge up. products such as ice cream. Pullshelfout.
Keep yourappliance clean toprevent odorbuild-up. Wipe upanyspills immediately andclean atleast twice ayear.Never usemetallic scouring pads, brushes, abrasive cleaners orstrong alkaline solutions onanysurface. Donotwash anyremovable parts inadishwasher. Always unplug theelectrical power. • When moving the unit, pull straight out. Do not shift the appliance side as this may tear or gouge the floor covering. • Damp objects stick to cold metal surfaces. with wet or damp hands.
Care and Cleaning Chart Part Cleaning Interior & Door Liners Agents • Soap and water • Baking soda and water Tips and Precautions • Use 2 tablespoons of baking soda in 1 quart of warm water. • Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part. Door Gaskets • Soap and water • Wipe gaskets with a clean soft cloth. Drawers • Soap and water • Use a soft cloth to clean drawer runners and tracks.
i 1-800-944-9044 (United States) (Canada) 1-800-265-8352 Visit our web site at www.frigidaire.com. Before calling for service, review this list. Itmay save you time and expense. This list includes corn, mon occurrences that are not the result of defective workmanship or materials in this appliance. PROBLEH APPLIANCE CAUSE CORRECTION + Appliance is plugged into a circuit that has a ground fault interrupt. Use another circuit.
PROBLEH "LO',isdispl_ on control CAUSE , CORRECTION Control has been locked, e Press the CONTROL LOCK key for three . seconds to unlock. . "E7";"E8";"E9" is displayed on control * The control has registered an error code. "Sb, isdisp_ on _r_aroL ,, The control is in Sabbath Mode. * For toIFfree telephone support in the U.S. and Canada: 1-800-374-4432 '* Pressing the CONTROL LOCK and TEMp MODE keys to exit Sabbath Mode. SOUND AND NOISE Louder sound levels when_ ever a.pp|F ancelson.
Your appliance iscovered byaone yearlimited warranty. Foroneyear fromyour original date of purchase, Electrolux willpayallcosts forrepairing orreplacing anyparts ofthisappliance thatprove tobedefective inmaterials orworkmanship when such appliance isinstalled, used andmaintained in accordance withtheprovided instructions. Exclusions This warranty does not cover the following: 1. Products with original serial numbers that have been removed, altered or cannot be readily determined. 2.