_e_C_ea_ng (aean_g Cha_...... COiTENTS Setting Surface ControJs ........................................ www.
Product Registration Register Your Product The PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to Electrolux Home Products. Congratulations on your purchase of a new appliance! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority. We know you'll enjoy your new appliance and Thank You for choosing our product.
Read all instructions before using this appliance. Save these instructions for future reference. If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. FOR YOUR SAFETY = Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. = WHAT TO DO IF YOU SMELL GAS" = Do not try to light any appliance.
• DO NOT TOUCH SURFACE BURNERS, GRATES, OR AREAS NEAR THESE BURNERS. Surfaceburners may be hot even though the flames are not visible. Areas near surface burners may become hot enough to cause burns. During and after use, do not touch or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cooktop and the surfaces facing the cooktop.
GROUNDING INSTRUCTIONS Forpersonalsafety, thecooktop must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded. DO NOT operate the cooktop using a 2-prong adapter or an extension cord. If a 2-prong wall receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wall receptacle installed by a qualified electrician.
LOCATIONS BURNERS (_) OF THE GAS SURFACE The SIMMER burner is best used for simmering delicate sauces, etc, The STANDARD sized burners are used for most surface cooking needs, The POWER burner is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food, Figure 3 - Model FGGC3047 Figure I - Model FFGC3010 Figure 4 - Model FFGC3610 Figure 2 - Model FGGC3045 Figure 5 - Model FGGC3645
OPERATING THE GAS SURFACE CONTROLS 1 Place cooking utensil on surface burner. 2 Push the surface control knob down and turn counterclockwise out of the OFF position. 3 Release the knob and rotate to the LITE position (see figure 1). Note: All four electronic surface ignitors will spark at the same time. However, only the burner you are turning on will ignite. 4 Visually check that the burner has a flame. 5 Turn the control knob counterclockwise to the desired flame size.
CLEANING VARIOUS PARTS OF YOUR COOl{TOP Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR CLEANING LATER. Aluminum Vinyl (Trim Pieces) & Use hot, soapy water and a cloth. Dry with a clean cloth.
Do not remove any parts from the cooktop until they have completely cooled and are safe to handle, Do not operate the surface Burners without the Burner Caps and Burner Heads properly in place. To Clean the surface Burner Caps and Burner Heads= Use a soap-filled scouring pad or a mild abrasive cleanser to clean the surface Burner Caps. The ports (or slots) around the Burner Heads must be routinely checked.
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: I Products with original serial numbers that have been removed, altered or cannot be readily determined.
