All about the Use & Care of your Gas Range TA B L E O F C O N T E N T S Setting Oven Controls .................................. 13-19 Features at a Glance ......................................... 7 Self-Cleaning .............................................. 20-21 Before Setting Oven Controls ........................... 8-9 Care & Cleaning .......................................... 22-24 Before Setting Surface Controls ........................ 10 Before You Call ..................................
PRODUCT RECORD AND REGISTRATION Contents Thank you for choosing Frigidaire. Product Registration ...................................................... 2 Important Safety Instructions ............................ 3-6 Features at a Glance .............................................. 7 Before Setting Oven Controls ............................... 8-9 Removing, replacing & arranging the oven racks ........... 8 Effortless™ Oven Rack system and assembly ................ 9 Before Setting Surface Controls ....
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type. Definitions This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
IMPORTANT SAFETY INSTRUCTIONS WARNING NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning. NEVER cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may trap heat, causing a fire hazard.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP WARNING Use Proper Flame Size—Adjust flame size so it does not extend beyond the edge of the utensil. The use of undersized utensils will expose a portion of the burner flame to direct contact and may result in ignition of clothing. Proper relationship of utensil to flame will also improve efficiency. • Know which knob controls each surface burner.
IMPORTANT SAFETY INSTRUCTIONS SELF-CLEANING OVENS • Clean in the self-cleaning cycle only the parts listed in this Use & Care Manual. Before self-cleaning the oven, remove the broiler pan and any utensils or foods from the oven. • Do Not Use Oven Cleaners—No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven. • Do Not Clean Door Gasket—The door gasket is essential for a good seal. Care should be taken not to rub, damage or move the gasket.
FEATURES AT A GLANCE 1 2 Your gas range features include: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. Electronic oven control with kitchen timer. Quick Bake Cooking System control (some models). Left front burner valve and control knob. Left rear burner valve and control knob. Center accent burner valve and control knob (some models). Right front burner valve and control knob. Right rear burner valve and control knob.
BEFORE SETTING OVEN CONTROLS Oven vent location Types of oven racks The oven vent is located below the control panel (See Fig. 1). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block the oven vent. oven vent location Fig. 1 Removing, replacing & arranging racks To remove - pull the rack forward until it stops. Lift up front of rack and slide out.
BEFORE SETTING OVEN CONTROLS Effortless™ Oven Rack system Some models are equipped with a special oven rack system that automatically partially extends the oven rack from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed. To assemble the Effortless™ Oven Rack system: 1. Locate all required parts.
BEFORE SETTING SURFACE CONTROLS Using proper cookware Set proper burner flame size For best cooking results, cookware should have flat bottoms that rests level on the burner grate. Before using cookware, check for flatness by rotating a ruler across the bottom of the cookware (Fig. 1). The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a well-lighted room. Each cone of flame should be steady and sharp.
SETTING SURFACE CONTROLS Setting surface controls Your gas appliance may be equipped with many different sized surface burners. The ability to heat food quicker and in larger volumes increases as the burner size increases. The smaller simmer burner (some models) is best suited for simmering delicate sauces, etc. The standard size (9,000 BTU) burners may be used for most surface cooking needs.
OVEN CONTROL FUNCTIONS READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below. Oven control (for models with Quick Bake™ only) Set clock pad— Used to set the time of day. Bake time pad— Used to enter the length of baking time needed.
SETTING OVEN CONTROLS Setting the clock Changing temperature display (°F or °C) When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". It is recommended to always set the clock for the correct time of day before using the appliance. The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).
SETTING OVEN CONTROLS Setting oven lockout Setting the minute timer The control can be programmed to lock the oven door and lockout the oven control pads. 1. Press 2. Press the To set the oven lockout feature (for models with Quick Bake) 1. Press to increase the time in one minute increments. Press and hold the and hold for 3 seconds. “Loc” will appear in display, the “Door Locked” indicator light will flash and the motor driven door lock will begin to close automatically.
SETTING OVEN CONTROLS Setting bake The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). The factory preset automatic bake temperature is 350°F (177°C). To set bake 1. Press . "— — —" appears in the display. 2. Within 5 seconds, press the or . The display will show "350°F (177°C)." By pressing and holding the or , the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius). 3.
SETTING OVEN CONTROLS To program oven for a delayed start time and to shut-off automatically (delayed Timed Bake) 1. Be sure that the clock shows the correct time of day. reminder until 2. Place the food in the oven. 3. Press . " — — — ° " appears in the display. 4. Within 5 seconds, press the or show "350°F (177°C)." By holding the . The display will or , the temperature can then be adjusted in 5°F increments (1°C if the control is set to display Celsius). 5. Press .
SETTING OVEN CONTROLS Quick Bake (some models) Benefits of the Quick Bake feature — Foods may cook up to 25 to 30% faster, saving time and energy. — Multiple rack baking. — No special pans or bakeware needed. How Quick Bake works Quick Bake uses a fan to circulate the oven's heat uniformly and continuously around the oven. This improved heat distribution allows for fast, even cooking and browning results. It also gives better baking results when using two racks at the same time.
SETTING OVEN CONTROLS Setting broil Use the broil feature to cook meats that require direct exposure to flame heat for optimum browing results. When broiling always remember to arrange the oven racks while oven is still cool. Position the oven rack as suggested in the broil settings table (See Fig. 3). 6 4 To set Broil 1. Arrange the oven rack while oven is still cool. 2. Press 3 2 . " — — "will appear in display. 3.
SETTING OVEN CONTROLS Adjusting the oven temperature Operating the oven light Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed. To adjust oven temperature: . 1. Press 2.
SELF-CLEANING Self-cleaning A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away with a damp cloth. IMPORTANT Adhere to the following self-clean precautions: • DO NOT use oven cleaners or oven protective coatings in or around any part of the oven interior. • DO NOT clean the oven door gasket (See Fig. 1).
SELF-CLEANING Setting a self-clean cycle or a delayed start self-clean cycle IMPORTANT To start a self-clean cycle immediately without a delay, skip steps 2 & 3 in the instructions provided below. Setting a self-clean cycle 1. Be sure the clock displays the correct time of day. 2. Press . The " : " in the time of day will flash. 3. Press and hold the pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed. 4. Press 5. Press the .
CARE & CLEANING Cleaning recommendation table Surface type Recommendation • Aluminum (trim pieces) & vinyl Use hot, soapy water and a cloth. Dry with a clean cloth. • Painted and plastic control knobs • Painted body parts • Painted decorative trim For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes. Rinse with a damp cloth and dry.
CARE & CLEANING Cleaning the cooktop and surface burners ignition port slots CAUTION To avoid possible burns DO NOT attempt any of the cleaning instructions provided below before turning OFF all of the surface burners and allow them to cool. orifice port Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized qualified Agency. Routinely clean the cooktop.
CARE & CLEANING Removing and replacing the lift-off oven door Oven door hinge locations CAUTION The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To remove oven door: 1. Open oven door completely (horizontal with floor - See Fig. 1). 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Fig. 2). A tool such as a small flatblade screwdriver may be required. 3.
Solutions to common problems • Problem BEFORE YOU CALL Solution Poor baking results. • Many factors affect baking results. Make sure the proper oven rack position is used. Center food in the oven and space pans to allow air to circulate. Allow the oven to preheat to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time. If you feel the oven is too hot or cool, see “Adjusting Oven Temperature” section in this Use & Care Guide.
BEFORE YOU CALL • Solutions to common problems Problem Solution Soil not completely removed after selfcleaning cycle. • Failure to clean bottom, front top of oven, frame of oven or door area outside oven seal. These areas are not in the self-cleaning area, but get hot enough to burn on residue. Clean these areas before the self-cleaning cycle is started. Burned-on residue can be cleaned with a stiff nylon brush and water or a nylon scrubber. Be careful not to damage the oven gasket.
MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions. Exclusions This warranty does not cover the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
This page is left blank intentionally