Use and Care Guide
Table Of Contents
- Table of contents
- Visit the Frigidaire web site at www.frigidaire.com
- Read this Use & Care Manual
- If You Received a Damaged Range...
- Save Time and Money
- Record model & serial numbers here
- Questions?
- Product Record and Registration
- Important Safety Instructions
- Gas Surface Burners
- Burner Caps and Burner Grates Assembly
- Installing Burner Grates
- Using Proper Cookware
- Cookware Material Types
- Setting Proper Burner Flame Size
- Home Canning
- Before Setting Surface Controls
- Operating the gas surface controls
- 1. Place cooking utensil on center of surface burner grate. Be sure the cooking utensil sets stable on the burner grate.
- 2. Push the desired surface control knob in and turn counterclockwise out of the OFF position.
- 3. Release the surface control knob and rotate to the LITE position. Visually check that the burner is lit.
- 4. Once the burner has a flame, push the control knob in and turn counterclockwise to the desired flame size. Use the control knob markings and adjust the flame as needed.
- Figure 5: Setting single burner
- Setting proper surface burner flame size
- Operating the gas surface controls
- Setting Surface Burners
- Before Setting Oven Controls
- 1
- 1. Self Clean - Use to select a 2, 3 or 4 hr clean cycle.
- 2. Add a Minute - Use to add one minute to the timer. This works with the kitchen timer and does not affect any cook time or start time functions.
- 3. Delay Start - Use with Bake, Convection Bake, Convection Convert, and Self Clean functions to program a delayed start time.
- 4. Bake Time - Use to set a specific amount of time needed for cooking. Automatically cancels cooking process at end of set time.
- 5. Set Clock - Use to set time of day.
- 6. Timer on/off - Use to set and cancel the timer.
- 7. Light - Use to turn internal oven light on and off.
- 8. Lock - Use to lock oven door and oven controls. Will not affect operation of surface burners.
- 9. Probe - Use to cook meat and poultry to the perfect internal temperature automatically.
- 10. Quick preheat - Use to quickly raise oven to preheat temperature.
- 11. Keep Warm - Maintains low heat to keep food warm at serving temperature.
- 12. Convect Convert - Use to select the convection convert function.
- 13. Bake - Use to start a normal Bake function.
- 14. Convect - Use to toggle between convection bake and convection roast.
- 15. Broil - Use to select broil function.
- 16. Start - Use to start oven functions.
- 17. Off - Use to cancel any oven function previously entered except clock and timer.
- Minimum and maximum settings
- 170°F (77°C)
- 550°F (288°C)
- 170°F (77°C)
- 550°F (288°C)
- 400°F (205°C)
- 550°F (288°C)
- 1 minute
- 11 hrs. 59 mins.
- 2 Hours
- 4 Hours
- 170°F (77°C)
- 3 Hours
- 1 Minute
- 5:59
- 1:00
- 12:59
- 0:00
- 23:59
- 300°F (148°C)
- 550°F (288°C)
- 140°F(60°C)
- 210°F(99°C)
- 300°F (148°C)
- 550°F (288°C)
- 1:00
- 12:59
- 0:00
- 23:59
- Setting the Clock
- Setting 12 Hour or 24 Hour display mode
- Setting Timer
- Add a Min
- Changing between continuous bake setting or 6 hour energy saving
- Changing temperature display from Fahrenheit to Celsius
- Setting Silent or Audible Control mode
- Setting Oven Lockout
- 1. Be sure oven door is completely closed.
- 2. Press and hold the lock key for 3 seconds. The motor driven door latch mechanism will begin locking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely lock. Once door is locked, the word ...
- 1. Press and hold the lock key for 3 seconds. The motor door latch will begin unlocking the oven door automatically. Do not open the oven door. Allow about 15 seconds for the oven door to completely unlock.
- 2. When the word DOOR with a lock icon no longer displays, the oven door may be opened, and the oven control keypad will be available for use.
- Operating Oven Lights
- Quick Preheat
- Quick Preheat is available for your convenience and can be programmed for temperatures between 170F and 550F. Follow the recipe or package directions for food preparation time and temperature. When quick preheat is complete, a reminder tone will soun...
- 1. Arrange the interior oven racks.
- 2. Press quick preheat. 350 will appear in the display.
- 3. Press start.
- 4. 350 and PREHEAT will be displayed while the oven is preheating.
- 5. Press off when baking is complete or to cancel the preheat feature.
- 1. Press quick preheat. 350 will appear in the display.
- 2. Enter the new preheat temperature. Press 4 2 5.
- 3. Press start. 425 will show in the display.
- 4. When baking is complete, press off.
- Figure 14: Single rack baking for convenience foods
- Figure 15: Oven rack position (5) best for cooking convenience foods
- Setting Bake
- Convection Bake
- 1. Press convect key once.
- 2. Convect bake and 350° will appear in the display.
- 3. Press start.
- 4. The convection fan will turn on after 6 minutes and stay on during the cooking process.
- 5. To cancel convection bake at any time, press off.
- Figure 18: Air movement using convection
- Figure 19: Baking on multiple levels
- Setting Convection Convert
- Figure 20: Check Food reminder shown in display.
- 1. Press convect key once for convection bake.
- 2. Press start. The convection fan will turn on after 6 minutes.
- 3. Press convect convert.
- 4. To cancel convection convert at any time, press off.
- 1. Press convect key once for convection bake.
- 2. Press start. The convection fan will turn on after 6 minutes.
- 3. Press bake time.
- 4. Enter 3 0 using numeric keypad.
- 5. Press start.
- 6. Press convec convert.
- 7. To cancel Convection Convert at any time, press off.
- 1. Arrange interior oven racks.
- 2. Press convect. Convect and bake will flash and 350 will appear in the display.
- 3. Press 4 0 0. Convect and bake will keep flashing and 400° will appear in the display.
- 4. Press start.
- 5. Set bake time or delay start if needed. For delay start or bake time instructions, see page 21.
- 6. Press convect convert, and the oven temperature displayed will be 25°F lower than the original set temperature of 400°F. The actual oven temperature and the fan icon will be displayed. A beep will sound once the oven temperature reaches 375°F.
- 7. Place food in the oven.
- Figure 20: Check Food reminder shown in display.
- Setting Bake Time
- Setting Delay Start
- Setting Broil
- Fig. 22 Boil pan and insert
- 1. Arrange the oven racks when cool. For optimum browning results, preheat oven for 5 minutes before adding food.
- 2. Press broil. Broil with oven door closed.
- 3. Position bakeware in oven.
- 4. Press start. To adjust the broil temperature, press broil again and then enter the new temperature using the number keys. Press start.
- 5. Broil on one side until food is browned; turn an broil other side until done to your satisfaction.
- 6. When finished broiling, press off.
- Fig. 22 Boil pan and insert
- 8th**
- 550°F (288°C)
- 9
- 6
- 140ºF (60ºC)
- Rare*
- 8th**
- 550°F (288°C)
- 8
- 6
- 145ºF (63ºC)
- Medium
- 8th**
- 550°F (288°C)
- 10
- 9
- 170°F (77ºC)
- Well
- 7th
- 550°F (288°C)
- 12
- 10
- 170°F (77ºC)
- Well
- 5th
- 550°F (288°C)
- 40
- 12
- 170°F (77ºC)
- Well
- 5th or 6th
- 550°F (288°C)
- 10
- 8
- 170°F (77ºC)
- Well
- 7th
- 550°F (288°C)
- 15
- n/a
- 170°F (77ºC)
- Well
- 7th
- 550°F (288°C)
- 7
- n/a
- 170°F (77ºC)
- Well
- 8th**
- 550°F (288°C)
- 11
- 9
- 145ºF (63ºC)
- Medium
- 7th
- 550°F (288°C)
- 12
- 10
- 170°F (77ºC)
- Well
- Convection Roast
- 1. Place oven rack on the bottom or next to the bottom oven rack position.
- 2. Place the meat on the broiler pan and insert.
- 3. Make sure the insert is securely seated on top of the broiler pan. Do not use the broiler pan without the insert.
- 4. Place meat (fat side up) on insert
- 5. Place prepared food on oven rack and slide into oven.
- 6. Close the door.
- 7. Press the convect key twice. Roast will appear in the display.
- 8. Press start.
- 9. When cooking is completed or to cancel convection roast press off.
- Table 1: Convection roasting temperature and time recommendations
- Convection Roast
- 4 to 6 lb.
- 350°F (177ºC)
- *160ºF (71ºC)
- 25-30
- 4 to 6 lb.
- 350°F (177ºC)
- *160ºF (71ºC)
- 25-30
- 2 to 3 lb.
- 400°F (204ºC)
- *160ºF (71ºC)
- 15-25
- 12 to 16 lb.
- 325°F (163ºC)
- 180°F (82ºC)
- 8-10
- 16 to 20 lb
- 325°F (163ºC)
- 180°F (82ºC)
- 10-15
- 20 to 24 lb.
- 325°F (163ºC)
- 180°F (82ºC)
- 12-16
- 3 to 4 lb.
- 350°F-375°F (177ºC-191ºC)*
- 180°F (82ºC)
- 12-16
- 4 to 6 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 30-40
- 4 to 6 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 20-30
- 3 to 4 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 20-25
- 5 to 7 lb.
- 325°F (163ºC)
- 160°F (71ºC)
- 30-40
- Cooking with Meat Probe
- Figure 23: Using the probe
- Figure 24: Probe in thickest area of food
- Figure 25: Probe in thickest part breast
- 1. Insert the probe into the food. Place prepared food on the desired oven rack position and slide into the oven.
- 2. Plug the connector end of the probe all the way into the probe receptacle while the oven is still cool. The receptacle is located on the upper left front oven cavity wall (See Figure 23).
- 3. When the probe is set, an acceptance tone will sound, the probe icon will illuminate, and the actual probe temperature appears in the display (See Figure 26). Close the oven door.
- Figure 26: Probe set showing probe temperature
- 4. Press probe key once. Enter the desired target food temperature using the numeric keys and set temperature for food type.
- 5. Press start to accept the target temperature.
- 6. Set for quick preheat, bake, convection bake, or convection roast and if necessary adjust the oven temperature accordingly.
- 7. The control will provide three beeps when the internal target temperature is reached.
- 8. The oven will automatically change to a keep warm setting and the actual probe temperature will remain in the display. Keep warm will maintain the oven temperature at 170°F (77°C) for 3 hours unless otherwise cancelled.
- 9. To stop cooking at any time, press off.
- Table 2: USDA recommended minimum internal cooking temperatures
- Cooking with Meat Probe
- 160°F (71°C)
- 165°F (74°C)
- 145°F (63°C)
- 160°F (71°C)
- 170°F (77°C)
- 165°F (74°C)
- 165°F (74°C)
- 165°F (74°C)
- 165°F (74°C)
- 160°F (71°C)
- 140°F (60°C
- 160°F (71°C)
- 165°F (74°C)
- 1. Press probe key and hold for 6 seconds.
- 2. Press self clean key and toggle until Continu: appears, as shown in Figure 27, then press start to accept.
- Figure 27: Probe set to continue cooking
- Figure 28: Probe set to cancel cooking
- Keep Warm
- 1. If needed, arrange oven racks and place cooked food in oven.
- 2. Press keep warm: KEEP WARM will appear in the display. (If no other keys are touched within 25 seconds the request for keep warm will clear.)
- 3. Press start. Keep warm will automatically turn on and then turn off after 3 hours unless cancelled.
- 1. Press bake time.
- 2. Enter 45 using numeric keypad.
- 3. Press start.
- 4. Press Bake and enter 425 on numeric keypad.
- 5. Press start to accept.
- 6. Press keep warm. KEEP WARM will appear in the display.
- 7. Press start. When the bake time is over, keep warm will automatically turn ON. The keep warm function will automatically turn OFF after 3 hours.
- Setting the Sabbath Feature (for use on the Jewish Sabbath and Holidays)
- 1. Be sure the clock is set with the correct time of day.
- 2. Arrange oven racks, place bakeware in oven, and close oven door. Press Bake.
- 3. Press START.
- 4. Note: If a bake time or delay start are desired enter the times at this point. See “Setting Bake Time” and “Setting Delay Start” on page 23 for detailed instructions.
- 5. Press and hold bake time and delay start simultaneously for about 3 seconds to set the Sabbath feature. Once the feature is set, SAb will appear in the display indicating the oven is properly set for the Sabbath feature (Figure 29).
- Figure 29: Oven set for Sabbath baking
- Figure 30: Display showing Sabbath failure
- Restoring Factory Default Settings
- Adjusting Oven Temperatures
- Self Clean
- Setting Self Clean
- 1. Be sure the oven is empty and all oven racks are removed. Remove all items from the oven. Be sure oven door is completely closed.
- 2. Press self clean and the default 3 hour clean time will appear in the display. You may accept the default 3 hour clean time or choose a different clean time by pressing the self clean key to toggle between 2, 3, and 4 hours clean time. Once you ha...
- 3. Press start to activate self clean.
- 1. CLEAN message will turn off, and Hot will appear in display window.
- 2. Once the oven has cooled down (about 1 hour) and Hot is no longer displayed, the oven door may be opened.
- 3. When the oven interior has completely cooled, wipe away any residue or powdered ash with a damp cloth or paper towel.
- Setting Delay Start Self Clean
- 1. Be sure the clock is set with the correct time of day, the oven is empty, and all oven racks are removed. Be sure oven door is completely closed.
- 2. Press delay start.
- 3. Using numeric keypad, enter 9 0 0.
- 4. Press start to accept
- 5. Press self clean.
- 6. Press start.
- 1. Press off.
- 2. If self clean has heated the oven to a high temperature, allow enough time for the oven to cool.
- 3. Before restarting self clean, be sure to read important notes below.
- Oven Controls
- Cleaning Various Parts of Your Oven
- General Cleaning
- Aluminum Foil, Aluminum Utensils, and Oven Liners
- Cleaning the Sealed Burners
- Broiler Pan Cleaning Tips
- Replacing Oven Lights
- 1. Turn electrical power off at the main source or unplug the appliance.
- 2. To remove the glass shield, pull the back side of the shield toward the inside of the oven in a manner to lift it up from the oven side. The glass shield should come out easily by pushing a little toward front of the wall oven (Figure 35).
- 3. Replace the halogen appliance bulb.
- 4. Gently push the glass shield toward the oven wall until it is firmly seated against the oven wall.
- 5. Reconnect electrical power to the appliance or turn power back on.
- Figure 35: Light shield and bulb
- Removing and Replacing the Oven Door
- 1. Open oven door completely, horizontal with floor.
- 2. Pull up the lock located on each hinge support toward front of the oven until the lock stops. You may have to apply a little upward pressure on the lock to pull it up (Figure 37 and Figure 38).
- 3. Grasp the door by the sides, and close the door until the door frame makes contact with the unlocked hinges.
- 4. Pull the bottom of the door toward you while rotating the top of the door toward the appliance to completely disengage the hinge levers (Figure 39).
- 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (Figure 39).
- 2. Hold the oven door at the same angle as the removal position. Carefully insert the hinge levers into the oven frame until you feel the hinge levers are seated into the hinge notches. The hinge arms must be fully seated into the hinge notches befor...
- 3. Fully open the oven door, horizontal with floor (Figure 36).
- 4. Push the door hinge locks up toward and into the oven frame on both left and right oven door hinges to the locked position (Figure 37).
- 5. Close the oven door.
- Figure 36: Door hinge location
- Figure 37: Door hinge locked
- Figure 38: Unlocking door hinge
- Figure 39: Remove door position
- Care and Cleaning
- Before You Call
- 1
- Warranty
- Blank Page
18
OVEN CONTROLS
Changing between continuous bake setting or 6 hour
energy saving
The oven control has a factory preset built-in 6 Hour Energy
Saving feature that will turn off the oven if the oven is left on
for more than 6 hours. The control may be programmed to
override this feature to bake continuously.
To change between continuous bake or 6 hour energy
saving feature:
1. Press and hold timer on-off for 6 seconds
2. Press self clean to toggle between 6 Hour OFF or Stay
On feature (
Figure 11).
3. Press start to accept choice.
Changing temperature display from Fahrenheit to
Celsius
The electronic oven control is set to display °F when
shipped from the factory. The display may be changed to
show either °F or ºC oven temperatures.
To change temperature display mode from °F to °C or
from °C to °F:
1. Press and hold broil for 6 seconds.
2. Once F (or C) appears in the display, press self clean
to toggle between Fahrenheit and Celsius temperature
display modes (
Figure 12).
3. Press start to accept the choice.
Important note:
The oven temperature display cannot be changed during
the cooking process or if a delay start has been set or self
clean is active.
Setting Silent or Audible Control mode
Silent mode allows the oven control to operate
without audible tones. The control may be
programmed for silent operation and later reset to operate
with all the normal audible tones.
To set for silent or audible mode:
1. Press and hold delay start for 6 seconds.
2. Press the self clean key to toggle between bEEP On or
bEEP OFF (
Figure 13).
3. Press start to accept the choice.
Setting Oven Lockout
To activate the oven lockout features:
1. Be sure oven door is completely closed.
2. Press and hold the lock key for 3 seconds. The motor
driven door latch mechanism will begin locking the oven
door automatically. Do not open the oven door. Allow
about 15 seconds for the oven door to completely lock.
Once door is locked, the word DOOR with a lock icon
will appear in the display.
To cancel the oven lockout feature:
1. Press and hold the lock key for 3 seconds. The motor
door latch will begin unlocking the oven door automati
-
cally. Do not open the oven door. Allow about 15
seconds for the oven door to completely unlock.
2. When the word DOOR with a lock icon no longer
displays, the oven door may be opened, and the oven
control keypad will be available for use.
Important note:
• To avoid damage to the oven door latching mechanism,
do not attempt to open or close the oven door whenever
the word DOOR with a lock icon is displayed.
• If a control key is pressed when oven lockout is active,
the control will triple beep indicating the key action is
not available when the oven lockout feature is active.
Figure 11: 6 hr energy saving (L) and continuous setting (R)
Figure 12: Display showing Fahrenheit and Celsius
Figure 13: Display showing audible and silent operation