Use and Care Guide
Table Of Contents
- Product Record and Registration
- Important Safety Instructions
- Cooking Recommendations
- Before Setting Oven Controls
- Setting Oven Controls
- About Your Microwave Oven
- Radio or TV Interference
- About Microwave Cooking
- About Foods
- About Utensils and Coverings
- Accessories
- About Children and the Microwave
- About Food Safety
- Preparing Food for Microwave Cooking
- Before Using Microwave Oven
- Microwave Features
- Display
- Before Operating the Microwave
- Control Panel
- Figure 3: Microwave Control Pad
- 1. Lock: Use to lock the controls to prevent accidental use.
- 2. Settings / User Preferences
- 3. Presets
- 4. Melt/Soften
- 5. Auto Cook
- 6. Sensor Cook
- 7. Power level (10 power levels available)
- 8. Timer On-Off
- 9. Number Keys
- 10. START/+30Sec.
- 11. STOP/Cancel: Clears all previous settings if pressed before cooking starts. During cooking, press once to pause (and START to resume); press twice to stop and clear all entries.
- Figure 3: Microwave Control Pad
- Quick Start
- Timed Heating
- Timer
- Setting Power Level
- 1. Use the number pad to enter the time in minutes and seconds. For example, to heat for 5 minutes and 30 seconds, enter 5 3 0.
- 2. Press the Power Level pad until the desired level displays. For example, press once for high power (PL- HI). Press Power Level four times to change to 70% power (PL-70). The selected power level appears in the display.
- 3. Press START.
- Multi-Stage Cooking
- Add Cook Time (+30 Sec)
- Defrost
- Popcorn
- Potato
- Veggies
- Beverage
- Melt / Soften
- Auto Cook
- Sensor Cook
- Reheat
- Keypad Lock
- Set Clock
- Audible Signal Elimination
- 1. Press the Settings pad twice.
- 2. “VOLUME” shows in the display. “LOW”, “MED”, and “HIGH” will show in a cycle.
- 3. Press START when the desired volume is shown in the display.
- 1. Press the Settings pad 3 times. “Lb / KG” shows in the display.
- 2. Press START to change the setting. “KG” or “LB” will briefly display to show the new setting.
- Setting the Microwave
- Care and Cleaning
- Before You Call
- Warranty
23
SETTING OVEN CONTROLS
Setting Delay Start
Delay Start sets a delayed starting time to oven cooking or
cleaning functions. Prior to setting a delay start, be sure the
time of day is set correctly. Delay Start must be set while
programming the cooking function.
To program oven for a delay start beginning at 5:30,
and for baking at 375°F:
1. Press Bake. Enter 3 7 5 using numeric keypad.
2. Press Delay Start.
3. Enter 5 3 0 using numeric keypad.
4. Press OK/START to accept.
5. The oven will turn on when the delay start time (5:30) is
reached.
Important note:
Delay Start may be set using a 24 hr clock. To set clock for
24 Hr operation, See
“Setting 12 Hour or 24 Hour display
mode” on page 18 for more information. The Delay Start
feature may be used with Convection Bake, Convection
Roast, Convection Convert, Bake, Broil and Self Clean
functions.
Bread Proof
The bread proof feature maintains a warm environment
useful for rising yeast-leavened products. Bread Proof is
available only in the lower oven. The following temperature
settings apply to the bread proof feature:
• Bread proof setting: 100°F/38°C.
To set oven to Bread Proof:
1. Press Bread Proof.
2. PrF will appear in the display.
3. Press OK/START to accept.
4. The oven will maintain the proofing temperature. Use
oven light to check on progress. Turn light off after
checking.
5. When finished proofing press OFF.
Food Poisoning Hazard. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness. Foods that can easily spoil
such as milk, eggs, fish, meat or poultry, should be chilled
in the refrigerator first. Even when chilled, they should not
stand in the oven for more than 1 hour before cooking
begins, and should be removed promptly when finished
cooking.
WARNING