Owner's Guide
Table Of Contents
- Product Record and Registration
- Important Safety Instructions
- Cooking Recommendations
- Before Setting Oven Controls
- Setting Oven Controls
- About Your Microwave Oven
- Radio or TV Interference
- About Microwave Cooking
- About Foods
- About Utensils and Coverings
- Accessories
- About Children and the Microwave
- About Food Safety
- Preparing Food for Microwave Cooking
- Before Using Microwave Oven
- Microwave Features
- Display
- Before Operating the Microwave
- Control Panel
- Figure 3: Microwave Control Pad
- 1. Lock: Use to lock the controls to prevent accidental use.
- 2. Settings / User Preferences
- 3. Presets
- 4. Melt/Soften
- 5. Auto Cook
- 6. Sensor Cook
- 7. Power level (10 power levels available)
- 8. Timer On-Off
- 9. Number Keys
- 10. START/+30Sec.
- 11. STOP/Cancel: Clears all previous settings if pressed before cooking starts. During cooking, press once to pause (and START to resume); press twice to stop and clear all entries.
- Figure 3: Microwave Control Pad
- Quick Start
- Timed Heating
- Timer
- Setting Power Level
- 1. Use the number pad to enter the time in minutes and seconds. For example, to heat for 5 minutes and 30 seconds, enter 5 3 0.
- 2. Press the Power Level pad until the desired level displays. For example, press once for high power (PL- HI). Press Power Level four times to change to 70% power (PL-70). The selected power level appears in the display.
- 3. Press START.
- Multi-Stage Cooking
- Add Cook Time (+30 Sec)
- Defrost
- Popcorn
- Potato
- Veggies
- Beverage
- Melt / Soften
- Auto Cook
- Sensor Cook
- Reheat
- Keypad Lock
- Set Clock
- Audible Signal Elimination
- 1. Press the Settings pad twice.
- 2. “VOLUME” shows in the display. “LOW”, “MED”, and “HIGH” will show in a cycle.
- 3. Press START when the desired volume is shown in the display.
- 1. Press the Settings pad 3 times. “Lb / KG” shows in the display.
- 2. Press START to change the setting. “KG” or “LB” will briefly display to show the new setting.
- Setting the Microwave
- Care and Cleaning
- Before You Call
- Warranty
32
SETTING OVEN CONTROLS
To program oven to Bake with default oven temperature
of 350°F and activate the Sabbath feature:
1. Be sure the clock is set with the correct time of day.
2. Arrange oven racks, place bakeware in oven, and close
oven door. Press Bake.
3. Note: If Delay Start is desired enter the timeat this point.
See
“Setting Delay Start” on page 23 for detailed
instructions.
4. Press OK/START.
5. Press and hold Self Clean and Delay Start simultane-
ously for about 3 seconds to set the Sabbath feature.
Once the feature is set, SAb will appear in the display
indicating the oven is properly set for the Sabbath
feature (
Figure 23).
To turn the oven off and keep the Sabbath feature
active:
1. Press OFF.
To turn off the Sabbath feature:
Press and hold both Self Clean and Delay Start simultane-
ously for at least 3 seconds to turn the Sabbath feature off.
The control will provide an acceptance tone, and SAb will
disappear from the display. The oven is no longer
programmed for the Sabbath feature.
What to do during a power failure or power interruption
after the Sabbath feature was activated:
Should you experience a power failure or interruption, the
oven will shut-off. When power is restored the oven will not
turn back on automatically. The oven will remember that it is
set for the Sabbath, and the oven display will show the
message SF for Sabbath failure (
Figure 24).
The food may be safely removed from the oven while still in
the Sabbath feature, however the oven cannot be turned
back on until after the Sabbath/Holidays. After the Sabbath
observance turn off the Sabbath feature.
Press and hold both Self Clean and Delay Start keys for at
least 3 seconds simultaneously to turn the Sabbath feature
off. SF will disappear from the display, and the oven may be
used with all normal functions.
Figure 23: Oven set for Sabbath baking
Figure 24: Display showing Sabbath failure