Installation Instructions

BUILT-IN MICROWAVE INSTALLATION INSTRUCTIONS
4. Install Mounting Screws
The microwave oven can tip when the
door is open. The mounting screws supplied with the
microwave oven must be installed to prevent tipping of
the microwave oven and injury to persons.
1. The mounting holes in the side trims may be used as
a template to locate the appliance mounting screw
holes (see gure 5).
2. Use the two screws supplied to x the appliance to
the cabinet.
6. Model and Serial Number Location
The serial plate is located along the interior side trim of
the oven and visible when the door is open.
When ordering parts for or making inquiries about your
microwave oven, always be sure to include the model
and serial numbers and a lot number or letter from the
serial plate.
Before You Call for Service
Read the "Before You Call for Service Checklist" and the
"Operating Instructions" in your Use and Care Guide:
it may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Refer to your Use and Care Guide for service phone
numbers.
Figure 6: Serial Plate LocationFigure 5: Mounting Screw Holes
5. Minimum Cutout Overlap
Mounting Holes
Serial Plate
Figure 7: Minimum cutout overlap
17-3/4"
min
cutout
28"
min cutout
1-1/2"
15/16"
1/8"
5