User Manual

2
fig.
Step 5:
•
(fig. )
5
Attach the exhaust duct. In the example below,
round metal duct furnace pipe has been used.
Add the duct tape to the metal duct furnace pipe
to insure a tight connection.
Step 4:
•
Mount the bracket assembly to the ceiling with 4
sets of long screws and washers (10 ,11 in
Use &
Care Guide ).
Make sure the power cable for the range hood is
routed inside the bracket.
(
fig.
)
4
fig.
4
fig.
5
Step 6:
•
Place the lower and upper chimney on the bracket
assembly, and hold it up with screwdriver
(fig. )
6
•
Fix the extension chimney on extension bracket
Step 7:
•
Push the range hood onto the lower bracket. And
fix them with 4 sets of nuts , span washers and
washers (13,14 and 15 in the
Use & Care Guide.)
(fig. )
7
fig.
7
Step 8:
•
Connect the power cord
Connect the duct pipe to the collar
•
fig.
8
(fig. )
8
Step 9:
•
Pull down the lower chimney
Fix the upper and lower chimney with 4 short
screws
(fig. )
•
fig.
9
fig.
6
9
10
fig.
10