Complete Owner's Guide

13OPERATING INSTRUCTIONS
Fan mode
Press the “Mode” button until the Fan mode indicator lights up.
In this mode, you can select fan speed “Lo”, “Med”, or “Hi”.
In this mode, the “ ” or “ ” button is disabled and the screen displays the room
temperature.
Note: In this mode, the air exhaust hose does not need to be connected.
Cool mode
Press the “Mode” button until the Cool mode indicator lights up.
Press the "fan speed" button to choose the fan speed according to the illumination of the
fan speed indicator.
You can choose the “Auto”, “Lo”, “Med”, or “Hi” fan speed setting.
Press the “ ” or “ ”button to choose the temperature you want.
Dry mode
Press the “Mode” button until the Dry mode indicator lights up. In this mode, the “ ” or “ ”
button is disabled and the screen displays the room temperature. The unit will continuously
drain moisture from the room.
Note: In this mode, the fan speed will be automatically set to "Lo", which cannot be
changed.
In this mode, condensate drainage is required, refer to the "Drainage Instructions" on Page
21 for more instructions to drain the excess condensate.