Warranty

Fan mode
Press the “mode” button until the Fan mode indicator lights.
In this mode, you can select fan speed “hi”, “med” or “low”.
The screen displays room temperature.
Note: In this mode, the air exhaust hose does not need to be connected.
Dry mode
Press the “mode” button until the Dry mode indicator lights. In this mode, the “ ” or “ ” button is disabled and the
screen displays the room temperature. The unit will continuously drain moisture from the room.
Note:
Note:
In this mode, the fan speed will be set as “low” automatically, which cannot be changed.
In this mode, condensate drainage are required, refer to the "Drainage Instructions" on Page 16-17 for more
instructions to drain the excess condensate.
The unit have a build in condensate pump to pump out the excess condensate during heating mode.
Condensate drainage are required, refer to the "Drainage Instructions" on Page 16-17 for more instructions
to drain the excess condensate.
Heat mode(For Heat & Cool models only)
Press the “mode” button until the Heat mode indicator lights.
Press the “ ” or “ ”button to choose the temperature you want.
Operating Instructions
°C
°F
°C
°F
°C
°F
Press the "fan speed" button to choose the fan speed according to the illumination of the fan speed indicator.
You can choose the “hi”, “med”, “low”, or “auto” fan speed setting.