Complete Owner's Guide

14 OPERATING INSTRUCTIONS
Sleep mode
When the unit is in Cool or Auto mode, you can press the “Sleep” button to make the unit
run in Sleep mode.
In this mode, the fan speed will automatically set to "Auto", which cannot be changed.
In Cool mode the selected temperature will increase by 2 °F 30 minutes after the mode is
selected. The temperature will then increase by another 2 °F for an additional 30 minutes.
This new temperature will be maintained for 7 hours before it returns to the originally
selected temperature. This ends the "Sleep" mode and the unit will continue to operate as
originally programmed.
The Sleep mode program can be cancelled at any time during operation by pressing the
"Sleep", “Mode”, “Fan speed” or “ ” button.
Note: In Fan or Dry mode, Sleep mode cannot be set.
During Sleep mode the brightness of the indicators will reduce by half.
Auto mode
Press the “Mode” button until the Auto mode indicator lights up.
Press the “ ” or “ ” button to choose the temperature you want. The screen will display
the temperature setting.
In this mode, the unit will automatically select cooling, or fan only operation depending on
what temperature you have selected and the room temperature. The air conditioner will
control room temperature automatically around the temperature point set by you.
Note: In this mode, the unit will run in Auto fan speed and cannot be changed.
Louver Swing Function
Press the “Swing” button to enable louver swing function, the swing indicator will illuminate
and the louver on the top panel will swing up and down. Press this button again to disable
the louver swing function.