Complete Owner's Guide
15OPERATING INSTRUCTIONS
Timer mode
The timer facilitates the user to delay the unit startup or shutdown.
How to delay startup
Plug in the unit, so the unit turns to standby.
Press the "Timer" button, then the Timer indicator and number of hours on the screen will
light up.
Tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay start timer at 0.5
hour increments up to 10 hours, then at 1 hour increments up to 24 hours.
After 5 seconds, the setting will be confirmed automatically and the control will count down
the time remaining until startup.
The unit will start up in the mode as previously set. Press the "Timer" button again within 5
seconds, you will exit the timer settings.
To cancel the setting, press the "Timer" button again. It will show the remaining time. Press
the button again to exit this function.
Dust filter reset
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more ecient
operation.
The “Clean” indicator will illuminate after 250 hours of fan operation. Press and hold the
“Dust Filter” button for 3 seconds to reset, after cleaning the filter.
Replace indicator
This feature is a reminder to replace the Advance Filter (not included, sold separately) for
more ecient operation.
The “Replace” indicator will illuminate after 4000 hours of fan operation. Press and hold the
“PureAir
TM
” button for 3 seconds to reset, after replacing the advanced filter.