User guide

UPPER DUCT COVER MOUNTING TEMPLATE
i
0.86
USE 3/16" DRILL
INSTALL WITH ITEMS # 8 & 9
2 PLACES
<?■
CUT ALONG THIS LINE
CEILING
( cut on this line to locate templates
at ceiling location.)
UPPER MOUNTING BRACKET - ITEM # 3
Note: Place this template in ceiling corner to mount
upper bracket for chimney cover.
USE 3/16" DRILL
INSTALL WITH ITEMS # 8 & 9
2 PLACES
MOUNT BRACKET WITH NOTCH UP
15.67
5.90
2.95
8.27
LOWER DUCT COVER MOUNTING BRACKET - ITEM # 4
RANGE HOOD LOCATION INSTRUCTIONS:
- LOCATE CENTER OF COOKTOP
- DRAW VERTICAL LINE ON WALL TO CEILING
- FROM INSTALLATION GUIDE CHART - DETERMINE DESIRED
VENT HOOD HEIGHT
- DRAW HORIZONTAL LINE AT THIS HEIGHT
- LOCATE AND TAPE TEMPLATE TO THE WALL FOR PROPER
INSTALLATION
- REPER TO INSTALLATION MANUAL FOR PROPER ASSEMBLY
NOTE:
LOWER AND UPPER MOUNTING HOLES ON RANGE HOOD
BODY SHOULD BE ATTACHED TO WOOD STRUCTURE TO
SUPPORT 150 LBS.
REFER TO INSTALLATION GUIDE FOR DETAILS
35.00
UPPER MOUNTING HOLES
USE 1/8" DRILL
INSTALL WITH ITEM # 11
2 PLACES
UPPER MOUNTING HOLES
USE 1/8" DRILL
INSTALL WITH ITEM # 11
2 PLACES
BOTTOM OF RANGE HOOD
( cut on this line to locate templates
at correct installation height.)
RANGE HOOD MOUNTING TEMPLATE FOR: FHWC3655LS
CENTERLINE OF PRODUCT LOCATION SHOULD MATCH CENTER OF COOKTOP
PN: 316902459
39.00