User manual

WARNING!
Refer to Safety chapters.
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in
the corner.
For minimal distances for fitting check the
table.
A
C
B
Minimum distances
DIMENSION MM
A
400
B
650
C
150
Technical data
Voltage 230 V
Frequency 50 - 60 Hz
Appliance class 1
DIMENSION MM
Height 900
Width 500
Depth 600
Levelling of the appliance
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
CAUTION!
Make sure you install the anti-tilt
protection at the correct height.
Make sure that the surface behind the
appliance is smooth.
You must install the anti-tilt protection. If
you do not install it, the appliance can tilt.
Your appliance has the symbol shown on
the picture (if applicable) to remind you
about the installation of the anti-tilt
protection.
8
INSTALLATION