User manual

Before the installation prepare the site and
materials (for example the masonry, the
electrical network, a socket, a circuit
breaker, an earthing, etc.). In the case of
an installation with a direct connection
(recommended), keep the wires long
enough so that they are not strained once
the connection is ready.
WARNING!
Before you connect the mains cable to
the terminal, measure the voltage
between phases in the house network.
Then, refer to the connection label at
the back of the appliance to use the
correct electrical installation. This
order of steps prevents from
installation errors and damage to the
electrical components of the
appliance.
Applicable types of cables for different
phases:
PHASE MIN. SIZE CABLE
1 3x6.0 mm²
3 with neutral 5x1.5 mm²
WARNING!
The power cable must not touch the
part of the appliance shaded in the
illustration.
10
INSTALLATION