Complete Owner's Guide

24
IMPORTANT
Check to ensure the power is o at
a circuit breaker/fuse box before
plugging the power cord into an outlet.
1. Plug the power cord into a grounded
outlet
2. Turn on the power at the circuit
breaker/fuse box.
3. Run the washer through a complete
cycle, checking for water leaks and
proper
operation.
4. If you have any questions during initial
operation, please review Self Help
before calling for service.
5. Place these instructions in a location
near the appliance for future reference.
WARNING
Improper grounding of the dryer may
cause serious injury or death. Check
with a licensed electrician if you are in
doubt as to whether the appliance is
properly grounded.

NOTE
A wiring diagram and technical data
sheet are located behind the dryer
access panel.
WARNING
When discarding or storing your old
laundry center, ALWAYS remove the
washer and dryer doors.
Grounding type wall receptacle
Power cord with
3-prong grounded plug
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Completing the installation
INSTALLATION