Complete Owner's Guide

29
Drying cycle settings
Drying Temperature (Dry Temp)
Select the temperature setting most
suitable for each load. To protect your
fabrics, not all temperatures are available
with every cycle. If an unavailable
temperature setting is selected by the
user, the nearest available temperature
will be substituted.
High
Recommended for durable fabrics and towels.
Normal
Recommended for most cotton fabrics.
Low
Recommended for delicate fabrics.
Drying cycle indicator lights
The drying cycle indicator lights provide
information during the dry cycle.
The Close Dryer
Door advisory LED
will illuminate if the
dryer door is open.
Fully close the dryer
door before starting
the dryer. The dryer
will not operate with
the door open.
The Clean Lint LED
will illuminate after each drying cycle
as a reminder to clean the lint filter. The
lint filter must be cleaned after every
load. This is NOT a warning of a clogged
exhaust duct or filter. Open door or press
CANCEL to turn o the LED.
The cycle status lights will illuminate as
each stage of the drying cycle is reached.
Stages include: Drying, Cooling, and Done.
Drying cycle controls
(Start, Pause, and Cancel)
START
Press DRYER START|PAUSE
button once to begin the
drying cycle. The unit will
emit one beep before the
drum begins to rotate.
Dryer Setting Chart
These temperatures and water levels are available with the following cycles
Quick Dry (25 min) Delicates (Auto dry) Activewear (Auto dry) Normal (Auto dry) Bulky (Auto dry) Air Flu - no heat(30 min) 90 min 60 min 30 min 15 min
Dry Temp (Temperature)
High
      
Normal
      
Low
       
 = Available selections. = Factory presets. = Non-modifiable presets.
PAUSE
Press DRYER START|PAUSE button while
the dryer is running to pause the drying
cycle. Opening the door with a cycle
running will
also pause the cycle. You will hear two
beeps. Allow the drum to come to a
complete stop before reaching inside.
Press the DRYER START|PAUSE button
while paused to restart the drying cycle.
CANCEL
Press the DRYER CANCEL button to
cancel the drying cycle. Wait for the
drum to come to a complete stop before
reaching inside.

NOTE
Air Flu setting does not use heat and
WILL NOT illuminate any of the Dry Temp
LED lights.
CONTROLS AND SETTINGSCONTROLS AND SETTINGS