Manual

SIDE BURNER PARTS ASSEMBLY

1. Install burner into side burner tray lining up

the three cutouts on the underside of the

burner. (See Fig. 22a)

2. Install burner cap onto burner (See Fig. 22b)

3. Install grate over burner (See Fig. 23)

Fig. 22a

LEAK TESTING

Make sure all burners are turned to "OFF".

Turn on the gas at the cylinder (LP models) or main

valve (Natural models). DO NOT turn on the side

burner. Perform a leak test at all connections and

fittings by spraying a 50/50 solution of water and

soap. If"any bubbles appear, correct the leak before

attempting to light the grill or side burner.

Fig. 22b

Fig. 23

IGNITOR ASSEMBLY

1. The Battery, Spring and Ignitor cap must be

installed before using.

2. Install the battery, positive side first.

3. Slide spring assembly over battery.

4. Screw ignitor cap onto ignitor.