Manual

Before Lighting

Warning: Important! Before Lighting...

Check the gas supply line ibr cuts, wear or abrasion.

Always keep your face and body as fhr away from the

grill as possible when lighting.

Grill Burner Lighting

Lighting the Grill with electronic ignitor

Always open the lid betbre attempting lighting.

Push and turn one of the control knobs counter clock-

wise to the "ttlGH" position and immediately press

the electronic ignitor button. You'll hear a snapping

sound. It may be necessary to hold the electronic

starter button for about 4 seconds. If the burner does

not light in 4 seconds, turn the knob to OFF and wait

5 minutes befbre trying again. Repeat above steps to

light remaining burners. (See Fig. 25)

Match Lighting

If by chance the electronic ignitor does not light the

burner, the burner may be lit with a match. Keep

your face as far away from the Grill surface as

possible and pass a lit, long stem match through the

spaces in the Grill rack to the ports of the back

crossover burner between the flavor grids. Position

the match near the burner ports and push and turn the

control knob counter clockwise to the "ttlGtt"

position. (See Fig. 26)

Fig. 25

Fig. 26