User manual

The walls with a catalytic coating are self-
cleaning. They absorb fat which collects on
the walls while the appliance operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
1. Clean the oven floor with warm water
and washing up liquid, then dry it.
2. Set the oven temperature to 250 °C and
let the oven operate for 1 hour.
3. When the appliance is cool, clean it with
a soft and moist sponge.
Cleaning the oven door
The oven door has two panels of glass
installed one behind the other. To make the
cleaning easier remove the oven door.
WARNING!
The oven door can close if you try to
remove the internal panel of glass
when the door is still assembled.
Do not lose the screws.
1. Open the door fully and hold the two
door hinges.
2. Lift and turn the levers on the two
hinges.
3. Close the oven door to the first opening
position (halfway). Then pull forward
and remove the door from its seat.
4. Put the door on a soft cloth on a stable
surface.
5. Use a screwdriver to remove 2 screws
from bottom edge of door.
26
OVEN - CARE AND CLEANING