User manual

Levelling
CAUTION!
Remove all the accessories from the
oven.
1. Open the lid of the appliance and
disassemble it.
2. Disassemble the pan supports and all
the burner assemblies.
3. Put the appliance on the sidewall on a
clean and smooth surface. Place each
foot into a separate hole, in the plinth,
and rotate it clockwise.
B
4. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for the
appliance.
To install all the accessories, do the first
step in an opposite sequence.
Electrical installation
WARNING!
The manufacturer is not responsible if
you do not follow the safety
precautions from Safety chapters.
This appliance is supplied with a main plug
and a main cable.
WARNING!
The power cable must not touch the
part of the appliance shaded in the
illustration.
36
INSTALLATION