User manual

17
INSTALLATION
Technical information
WARNING
ALWAYS USE SAFETY GLOVES WHILE HANDLING THE
COOKER
• The installation, adjustments, conversions and
maintenance operations listed in this part must
only be carried out by qualied personnel. The
manufacturer cannot be held responsible for any
damage to persons or property resulting from an
incorrect installation of the appliance.
• The safety and automatic adjustment devices of
the appliances may, during its life, only be modied
by the manufacturer or duly authorised supplier.
• In accordance with the gas standard, the all-gas
and combi appliances are “class 1” (free standing)
or “class 2 subclass 1” (recessed) and, as such,
must comply with the clearances specied in gure
below consequently any side walls must be no
higher than the work top.
• The walls adjacent to and surrounding the
appliances must be able to withstand an
temperature of 95°C.
• The installation of all-gas and combi appliances
must comply with the standards in force.
• This appliance is not connected to a ue for
discharge of the combustion products; therefore,
it must be connected in compliance with the above
mentioned installation rules. Particular attention
must be paid to the instructions given below for
ventilation and aeration.
Installation
Unpacking your cooker
• Once the wrapping has been removed from
the outer surfaces and the various inner parts,
thoroughly check that the appliance is in perfect
condition.
If you have any doubts do not use the appliance
and call in a qualied person.
• Some parts mounted on the appliance are
protected by a plastic lm. This protection must
be removed before using the appliance. We
recommend slitting the plastic lm along the edges
with a sharp knife or pin.
• Do not move the appliance by the handle.
The packaging materials used (cardboard, bags,
polystyrene foam, nails etc.) must not be left
anywhere within easy reach of children as they
are a potential hazard source.
211!nn
261!nn
861!nn
261!nn