User manual

This appliance is suitable for the following
markets: CR DO SV GT HN NI PA TT
Installation
WARNING!
Only a qualified person must install
this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not pull the appliance by the handle.
Install the appliance in a safe and
suitable place that meets installation
requirements.
Keep the minimum distance from other
appliances and units.
Before mounting the appliance, check if
the oven door opens without restraint.
Do not operate the appliance without the
cavity bottom cover. It is a functional
safety component.
The appliance is equipped with an
electric cooling system. It must be
operated with the electric power supply.
Cabinet minimum
height (Cabinet under
the worktop mini-
mum height)
590 (600) mm
Cabinet width 560 mm
Cabinet depth 550 (550) mm
Height of the front of
the appliance
594 mm
Height of the back of
the appliance
576 mm
Width of the front of
the appliance
595 mm
Width of the back of
the appliance
559 mm
Depth of the appli-
ance
569 mm
Built in depth of the
appliance
548 mm
Depth with open door 1022 mm
Ventilation opening
minimum size. Open-
ing placed on the
bottom rear side
560x110 mm
Ventilation opening
minimum size. Open-
ing placed on the up-
per rear side
560x50 mm
Mains supply cable
length. Cable is
placed in the right
corner of the back
side
1500 mm
Mounting screws 4x25 mm
Electrical connection
WARNING!
Risk of fire and electric shock.
All electrical connections should be
made by a qualified electrician.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by our
Authorised Service Centre.
5
SAFETY INSTRUCTIONS