Owner's Guide

26
OVEN CONTROLS
Setting Self-Clean Cycle Duration
The self clean key controls the self-cleaning feature. If you
are planning to use the oven directly after a self-clean cycle
remember to allow time for the oven to cool down and the
oven door to unlock. This normally takes about one hour. A
3 hour self-clean cycle will actually take about 4 hours to
complete.
It is recommended to use a 2 hour self-clean cycle for light
soils, a 3 hour cycle for average soils, and a 4 hour cycle for
heavy soils.
To set the controls for a 3 hour self-cleaning cycle to
start immediately and shut off automatically:
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press self clean. CLn and 3:00 HR will show in the
display. The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). If a 2 or 4 hour
clean time is desired, press self clean multiple times to
toggle between 2, 3, or 4 hours.
3. Press start. door Loc will appear, a beep will sound,
and the word DOOR and the
icon will flash; CLn will
remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door is locked, the DOOR indicator light and
icon
will stop flashing and remain on, and the oven icon will
appear in the display. Allow about 15 seconds for the
oven door to lock completely.
When the self-clean cycle is completed:
1. HOT will appear in the display. The time of day, the
word DOOR, and the
icon will remain in the display.
2. Once the oven has cooled for approximately 1 hour,
door OPn will appear, and the word DOOR and the lock
icon will flash until the door unlocks. The door can be
opened, and the display will show the time of day.
To stop or Interrupt a self-cleaning cycle:
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. Press off.
2. The oven door can only be opened after the oven has
cooled down for about 1 HOUR. door OPn will appear,
and the word DOOR and the
icon will flash until the
door is unlocked. The oven door can then be opened,
and the timer will revert back to the time of day.
The self clean and delay start keys control the delayed
self-clean operation. The automatic timer will turn the oven
on and off at the time you select in advance.
To set the control for the self-cleaning cycle to start at a
delayed time and shut off automatically (example: 3
hour self-clean cycle to start at 4:30):
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press self clean. CLn and 3:00 HR will show in the
display. The control will automatically clean for a 3 hour
period. If a 2 or 4 hour clean time is desired, press self
clean multiple times to toggle between 2, 3, or 4 hours.
3. Press start. door Loc will appear, a beep will sound,
and the word DOOR and the
lock icon will flash. The
letters CLn will remain on in the display.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked, the word DOOR and the
lock
icon indicator light will quit flashing and remain on.
5. Press delay start. Enter the desired start time using the
number keys 4 3 0.
6. Press start. DELAY, DOOR, and the icons will
remain on.
7. The control will start the self-cleaning at the set start
time for the period of time previously selected. At that
time, the icon DELAY will go out; CLn and oven icon
will appear in the display.
When the self-clean cycle is completed:
1. HOT will appear in the display. The time of day, the
word DOOR, and the lock icon will remain in the display.
2. When oven cools approximately 1 HOUR, door OPn
will appear, and the word DOOR and the
icon will
flash until the door is unlocked. The oven door can then
be opened, and the timer will revert back to the time of
day.